Asco Solenoid Controller for Process Valve, E908A001

  • RS Stock No. 656-3305
  • Mfr. Part No. E908A001
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Control unit for POSIFLOW solenoid valve

Proportional electronic control unit for POSIFLOW solenoid valve.
Converts analogue input control signals of a solenoid by means of pulse width modulation.
Valve closure function at less than 2% of the maximum control signal.
Adjustable ramp control.
Coil supply current is independent of coil resistance (temperature) and supply voltage variations.
Coil supply current can be adjusted based on control signals.
Electronic circuit is integrated in a unit that can be connected to a 3-terminal coil.

Standards

ISO 4400 / EN 175301-803, form A / IEC 335.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
For Use With Proportional solenoid valve
Series E908
Supply Voltage 24 V dc
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 407.33
(exc. GST)
$ 448.06
(inc. GST)
units
Per unit
1 +
$407.33
Related Products
WRAS approved water management system that complies with ...
Description:
WRAS approved water management system that complies with Bylaw 82 and 83ABS bodyPIR sensor 54μA (nominal current), 750mA (peak current for 50ms), 6Vdc (Voltage)Sensor range 3m – 4mField of view 138º (horizontal), 125º (vertical)Infrared sensor unit may be fitted directly ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the ...
Internal timers can be adjusted after the supply ...
Description:
Internal timers can be adjusted after the supply is isolated without removing the unit. Robust polyamide construction to DIN 43650For controlling RS solenoid valves and others with the same type of terminationProtected to IP65User programmable via built-in DIP switches and ...
Asco’s solenoid coil is predominantly used with solenoid ...
Description:
Asco’s solenoid coil is predominantly used with solenoid valves within pneumatic applications. Another common application is to start, stop or direct the flow of hydraulic fluid. It has been created and designed to withstand and operate in aggressive conditions and ...