TE Connectivity AMPLIMITE HD-20 Series Cable Mount, 9 Pin Standard D-Sub D-sub Connector Plug, Shell Size E

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.

These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

The AMPLIMITE series are designed to be used in communication and data interfaces.
• 65% higher density than HD-20 connectors
• Space saving
• 94V0 black thermoplastic insert
• Tin plated, steel shell

Features and Benefits

• Shell sizes offer wide choice of contact positions - 9, 15, 25, 37 and 50.
• Lower cost, commercial version of the military approved series.
• Tin or zinc plated shells, with or without grounding indents.
• Crimp snap-in contacts allows loading of only the number of contacts being used.
• Available with shielding hardware and shielding enclosure kits.
• Numerous cable clamps and mating hardware options.
• Low cost, high performance, precision formed crimp contacts.


• Crimp contacts – 446-787
• Male screw retainers – 450-9208 & 717-4498
• Female screw-locks – 717-4543 & 450-9270
• Locking post assembly – 450-9365
• Spring latch – 450-9321
• Latching block with threaded hole – 450-9371
• Latching block with slot recess – 680-9392



TE Connectivity AMPLIMITE D-Subminiature Connectors

Attribute Value
Number of Contacts 9
Gender Male
D Connector Type Standard
D-Sub Shell Size E
Mounting Type Cable Mount
Body Orientation Straight
Current Rating 3A
Voltage Rating 250 V ac
Contact Plating Gold over Nickel
Contact Material Brass
Length 30.8mm
Depth 6.1mm
Contact Size 20
95 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 4.51
(exc. GST)
$ 4.96
(inc. GST)
Per unit
1 - 24
25 - 74
75 - 199
200 - 399
400 +
Packaging Options:
Related Products
This Thomas & Betts detectable miniature cable tie ...
This Thomas & Betts detectable miniature cable tie base 191 x 12.7 mm (0.75 x 0.5 in) is especially well-suited for use with high-density packaging. The threaded insert permits screwing from outside of the mounting surface. The Nylon version is ...
A protective channel designed for use with stainless ...
A protective channel designed for use with stainless steel cable ties It provides protection against chafing, vibration and shock. Ideal for arduous conditions and where limited fire hazard materials are required. Features and benefits• Protects bundles• Limited Fire Hazard Polyolefin ...
This support provides a saddle for the wire ...
This support provides a saddle for the wire run Ty-Rap® cable tie is threaded under the bundle and tied in the usual manner. Choice of size between 17.1 x 11.2 mm ( 818-7041 ) and 23.4 x 14.3 mm ( ...
This cable tie mount is manufactured from nylon ...
This cable tie mount is manufactured from nylon 66 and has a barbed push mounting base This natural coloured cable tie mount is self-extinguishing, meeting UL 94 V-2 standard for flammability and is suitable for use supporting electrical cables on ...