Schneider Electric Harmony XVB Series Red Steady Effect Beacon Unit, 24 V ac/dc, LED Bulb, AC, DC, IP65

The Schneider Harmony XVBC series is a visual and audible signalling tower used for indicating the various states of operation for a device or installation, such as: start, stop machine, no material, call technical staff, and fault signalling.
These signal towers offer a high degree of protection, extra brightness and excellent reliability enable them to adapt to any type of environment.
Industry applications include machine manufacturers (assembly line, etc.), mobile loads (travelling cranes, trolleys, etc.). Para-industrial and service sector include motorway tolls, cash registers, distribution switchboards, etc.

• Available as incandescent (bulbs must be ordered separately) or LED modules
• May be assembled with up to 5 light modules or 4 light modules and 1 sound module
• Buzzers are available with intermittent or continuous tones
• Base & cover need to be ordered separately for mounting
• Tubes and tube cover available for raising the beacons height
• Sound unit operates from a 12-48 Vac or 120-230 V supply providing a sound level of 90 dB at a frequency of 0-12 kHz
• All units have an operating termperature range of -25 to +50 °C (apart from the static lens units without lamps -25 to +70 °C)
• Made from Glass Reinforced Polyamide and Polycarbonate
• IP65 rated
• Long distance signalling: 35 to 50 m
• Units are 70 mm in diameter and 63 mm in height
• Cable access from side or beneath

• High degree of protection: IP66
• International standards: CE, UL, CCC, CSA, Ghost

Loud, dangerous and busy environments often call for modular beacons and tower lights, from health & safety to preventing damage to machinery there are many applications. Below are some of the applications for the XVB Series:
• Assembly lines
• Mobile loads (travelling cranes, trolleys etc.)
• Motorway tolls
• Cash registers
• Distribution switchboards
• Alarms

Bulbs, base and covers need to be ordered separately for mounting, accessories such as tubes and tube covers are also available for raising the beacons height.

CE, UL, CCC, CSA, Ghost.

Conforms to: IEC/EN 60947-5-1 (beacons, base and cover).

Keen to keep workers informed about machine faults? Get the message across with this Schneider Electric beacon unit. Its steady LED shines clearly and can be seen in all lighting conditions to make sure a warning can't be missed. You can slot this unit together with indicators of colours to build a bespoke tower. Setting it up is a doddle, as it fits accurately onto a compatible mounting base (179-9461). Thanks to the beacon's IP66 rating, you can trust it holds its own against dust and low-pressure water jets.

• Small footprint, with a base diameter of 70mm
• Works with AC and DC voltages rated at 24V for versatile installation
• Durable PC lens and base to withstand impact
• Current consumption of under 47mA cuts down on power use
• Comes with an integral LED for easy set-up

• Logistics industry
• Chemical processing
• Small-parts manufacturing

In industrial applications, a red beacon like this one usually indicates an equipment malfunction that needs immediate attention. Red lights can also be used as part of a signal tower to tell moving traffic to stop.