Matrix EB085, E-block DSP Input Evaluation Board

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): RO
Product Details

EB085 DSP Input Board

The EB085 board can create digitally sampled analogue waveforms to be used with external circuits.

Features & Benefits of the EB085 DSP Input Board
•Multiple adjustable amplifier stages
•On-board microphone
•On-board mono line in jack
•16-bit analogue to digital converter (ADC)
•Configurable low pass filter circuit
•Multiple scope test points — to monitor the signal at various stages in the output chain
•LED output — detects the signal is being over amplified and if data is being lost

Specifications
Attribute Value
Kit Classification Evaluation Board
Kit Name E-block
1 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 100.02
(exc. GST)
$ 110.02
(inc. GST)
units
Per unit
1 +
$100.02
Related Products
Pmod IOXP I2C Port Expander The Pmod IOXP ...
Description:
Pmod IOXP I2C Port Expander The Pmod IOXP is an I/O expansion module based on the Analog Devices ADP5589 device It provides up to 19 additional GPIO pins from a serial I²C bus connection, as well as a keypad matrix ...
STM32F3 series Evaluation Board (STM32F373 MCU) The STM32373C-EVAL ...
Description:
STM32F3 series Evaluation Board (STM32F373 MCU) The STM32373C-EVAL Evaluation Board is designed as a complete demonstration and development platform for STMicroelectronic’s ARM Cortex-M4 core-based STM32F373VCT6 microcontroller It features two I²Cs, three SPIs, three USARTs, one CAN, one CEC controller, one ...
ADAC click is an 8-channel 12-bit ADC, DAC ...
Description:
ADAC click is an 8-channel 12-bit ADC, DAC and GPIO The click is designed to run on either 3.3V or 5V power supply. ADAC click communicates with the target microcontroller over I2C interface, with additional functionality provided by the RST ...
The MAX14840PMB1 peripheral module provides the necessary hardware ...
Description:
The MAX14840PMB1 peripheral module provides the necessary hardware to interface the MAX14840E transceiver to any system that utilizes Pmod™-compatible expansion ports configurable for a UART interface The IC is a +3.3V ESD-protected transceiver intended for half-duplex communication up to 40Mbps. ...