Infineon, 12V Protected Switch Shield

  • RS Stock No. 150-1734
  • Mfr. Part No. SHIELDBTS500151TADTOBO1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 1.5mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive resistive, capacitive and inductive loads (e.g. heating resistors, filter capacitors, motor, valves and pumps).

Stand alone and microcontroller mode.
Easy to use “plug and play”.
Fully configurable for different kind of loads.
Enables quick evaluation of Power PROFET™ for switching loads (BTS50015-1TAD: I NOM = 33 A).
Fast prototyping for switching applications.
Relay and fuse replacement in power distribution and junction boxes.
Drive resistive, inductive and capacitive loads such as heating resistors, filter capacitors, motor, valves and pumps.

Specifications
Attribute Value
Product Name 12V Protected Switch Shield
Kit Classification Evaluation Board
Processor Part Number SHIELDBTS500151TADTOBO1
For Use With Arduino
3 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
Was $54.16
$ 43.06
(exc. GST)
$ 47.37
(inc. GST)
units
Per unit
1 - 1
$43.06
2 +
$42.67
Related Products
The MEAS weather shield for ARDUINO/Genuino mother board ...
Description:
The MEAS weather shield for ARDUINO/Genuino mother board provides the necessary hardware to interface the HTU21D digital relative humidity sensor, MS5637 digital barometric pressure sensor, temperature system sensor (TSYS01), MS8607 digital relative humidity and digital pressure sensor, TSD305-1C55 digital ...
The MKR Relay Protoshield allows you to easily ...
Description:
The MKR Relay Protoshield allows you to easily add relays to your MKR board based project The shield provides two relays called RELAY1 and RELAY2 commanded by pin 1 and pin 2respectively. The shield also provides easy connection by means ...
The MKRFox1200 is shipped with a GSM antenna ...
Description:
The MKRFox1200 is shipped with a GSM antenna that can be connected to the board with the micro UFL connector If you want to change the antenna please check that it can accept frequencies in the Sig Fox's range (868 ...
Arduino Uno is the most popular Arduino board ...
Description:
Arduino Uno is the most popular Arduino board so far, however it is sometimes frustrating when your project requires a lot of sensors or Leds and your jumper wires are in a mess The purpose of creating the Grove - ...