Parallax Inc 28108

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Line-follow kit for Boe-Bot mobile robot

This kit uses QTI infrared emitter/receiver modules to enhance the line-following capability of your Boe-Bot robot. Mount three or four sensors underneath the Boe-Bot chasis, and adjust the position to detect lines of different widths. Learning to use the QTI is easy with the illustrated instructions and example BASIC Stamp code provided.

Designed for close proximity infrared detection
Use as a digital sensor array to detect black lines in order to follow electrical tape courses or navigate mazes
Use as an analogue sensor to detect shades of grey

Note

The Boe-Bot robot is NOT supplied as part of the kit but is available seperately: 781-0924

A BASIC Stamp is a single-board computer that runs the Parallax PBASIC language interpreter in its microcontroller. The developer's code is stored in an EEPROM, which can also be used for data storage. The PBASIC language has easy-to-use commands for basic I/O, like turning devices on or off, interfacing with sensors, etc. More advanced commands let the BASIC Stamp module interface with other integrated circuits, communicate with each other, and operate in networks. The BASIC Stamp microcontroller has prospered in hobby, lower-volume engineering projects and education due to ease of use and a wide support base of free application resources.

4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 40.41
(exc. GST)
$ 44.45
(inc. GST)
units
Per unit
1 - 9
$40.41
10 - 49
$40.01
50 +
$38.81
Related Products
This antenna kit is designed for use with:FiPy ...
Description:
This antenna kit is designed for use with:FiPy - 5 network IoT development board (RS 136-8855)LoPy - LoRa, WiFi, BLE development board (RS 125-9532)SiPy - SigFox, WiFi, BLE development board (RS 125-9533 and RS 125-9540).The kit includes:- RF Cable Assemblies ...
The JTAG-HS3 programming cable allows high-speed programming/debugging of ...
Description:
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC. • Separate Vref drives JTAG signal voltages• Vref can be any voltage between +1.8V and +5V• USB 2.0 HS port drives JTAG bus ...
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, ...
Description:
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, they are bare and tinned wires. The difference between the two cables is that the TTL-234X-5V-WE operates at +5V levels (signals and power supply) and the TTL-234X-3V3-WE operates at +3.3V levels (signals ...
The reduced form factor and software enhanced J-Link ...
Description:
The reduced form factor and software enhanced J-Link PLUS Compact (J-Link+ Compact). This ARM/Cortex Debug Probe, Microchip PIC32 Debug Probe, Renesas RX Debug Probe, and SiLabs EFM8 / C8051 Debug Probe includes a USB cable, and a 20-pin, 0.1" ribbon ...