W5500 Ethernet Shield

  • RS Stock No. 184-5101
  • Mfr. Part No. 103030021
  • Manufacturer Seeed Studio
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

The W5500 Ethernet Shield v1.0 can be used to provide your projects with internet connectivity.W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. The shield also have two Grove connectors and a microSD card socket to support projects which require storing large amounts of data from Grove sensor. The RJ45 port (Where the Ethernet cable is connected to) is low enough to allow you to stack more shields on top of this one if needed.

Supports Hard wired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PoE
Supports 8 independent sockets simultaneously
Supports Power down mode
Supports Wake on LAN over UDP
Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
Internal 32Kbytes Memory for TX/RX Buffers
10BaseT/100BaseTX Ethernet PHY embedded
Supports Auto Negotiation (Full and half duplex, 10 and 100 based )
Not supports IP Fragmentation
3.3V operation with 5V I/O signal tolerance
LED outputs (Full/Half duplex, Link, Speed, Active)
Micro-SD card socket
Grove connector for I2C and UART

35 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 61.63
(exc. GST)
$ 67.79
(inc. GST)
units
Per unit
1 - 1
$61.63
2 - 4
$56.50
5 - 9
$52.16
10 - 19
$48.42
20 +
$45.20
Related Products
The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development ...
Description:
The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development kit for high-performance, high-reliability and energy efficient serial F-RAM devices.The CY15FRAMKIT-001 kit has been designed to operate with the Arduino UNO R3 board with stackable connectors. Compatible with CY8CKIT-042, CY8CKIT-042-BLE and ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. DC MOTOR click provides full H-Bridge control for a small DC motor. DRV8833RTY H-Bridge motor driver chipSpeed controlled by PWM signalTwo signals provide direction and brake/coast ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. STEPPER click features a microstepping stepper motor driver with a built-in translator. A3967SLBT stepper motor driver chipDrives bipolar step motors in full-, half-, quarter- and eighth-step ...
This 18-channel R/C servomotor driver shield is designed ...
Description:
This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format ...