Digilent 410-299 for use with JTAG-HS3, Xilinx Tool

  • RS Stock No. 134-6435
  • Mfr. Part No. 410-299
  • Manufacturer Digilent
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-HS3 FPGA Programming Cable

The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC.

Features

• Separate Vref drives JTAG signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec
• Compatible with Xilinx ISE 14.1 and newer
• Compatible with Xilinx Vivado 2013.3 and newer
• PC connector: MicroUSB
• JTAG connector: 2 x 7-pin 2mm
• Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform

Supported Target Devices

• Xilinx FPGAs • Xilinx Zynq-7000
• Xilinx CoolRunner™/CoolRunner-II CPLDs
• Xilinx Platform Flash ISP configuration PROMs
• Selected third-party SPI PROMs
• Selected third-party BPI PROMs

Target Devices Not Supported

• Xilinx 9500/9500XL CPLDs • Xilinx 1700 and 18V00 ISP configuration PROMs
• Xilinx FPGA eFUSE programming

Note

This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

USB cable

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
For Use With JTAG-HS3, Xilinx Tool
On back order for despatch 22/07/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 99.71
(exc. GST)
$ 109.68
(inc. GST)
units
Per unit
1 +
$99.71
Related Products
The MAX14840PMB1 peripheral module provides the necessary hardware ...
Description:
The MAX14840PMB1 peripheral module provides the necessary hardware to interface the MAX14840E transceiver to any system that utilizes Pmod™-compatible expansion ports configurable for a UART interface The IC is a +3.3V ESD-protected transceiver intended for half-duplex communication up to 40Mbps. ...
Cat 6 Shielded Termination Tool Kit Professional handtool ...
Description:
Cat 6 Shielded Termination Tool Kit Professional handtool for the assembly of shielded Cat 6 plugsCrimps both the contacts and the shield fingers in a single step to maximize installation and applied cost efficiencies. Professional handtool for the assembly of ...
The TE Connectivity CERTI-CRIMP II plier type manually ...
Description:
The TE Connectivity CERTI-CRIMP II plier type manually operated crimping tool structures a fixed die (crimper), a movable die (anvil), a locator/insulation stop and a ratchet This tool is used to join or connect two pieces of material by compression. ...
Dynamic Series is a broad product family that ...
Description:
Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized package The connector family is designed for use in control system applications and is suitable for ...