Phoenix Contact, SUBCON-PLUS 9 Way 35 ° Cable Mount D-sub Connector Socket

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specifications
Attribute Value
Number of Contacts 9
Gender Female
Body Orientation 35 °
Mounting Type Cable Mount
Termination Method Screw Terminal
Current Rating 100.0mA
Housing Material Metal Plated ABS
Voltage Rating 50.0 V
Length 58.0mm
Width 16.6mm
Depth 39.4mm
Dimensions 75 x 16.6 x 39.4mm
Series SUBCON-PLUS
Maximum Operating Temperature +75°C
Minimum Operating Temperature -20.0°C
9 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 76.02
(exc. GST)
$ 83.62
(inc. GST)
units
Per unit
1 +
$76.02
Related Products
Dip-soldered connection, straight, threaded bolt and fastening clip ...
Description:
Dip-soldered connection, straight, threaded bolt and fastening clip Series TMC connectors are available in various housing sizes and with different numbers of pin. Laminated ground contact on the male housings for optimal screening Solid contacts on the male connectors with ...
Profibus D Sub External Cable Clamp These I-Net ...
Description:
Profibus D Sub External Cable Clamp These I-Net Profibus bus connectors with external cable clamp are suitable for large cables 4-14 mm diameter There are four types of body configuration of the external cable clamp I-Net Profibus bus connectors: Standard, ...
Freenet System Panel Mounting Frames From Phoenix Contact, ...
Description:
Freenet System Panel Mounting Frames From Phoenix Contact, a professional range of panel mounting frames designed for use with the Freenet system The panel mounting frames are constructed of either diecast zinc or black PA plastic. Available in both round ...