Phoenix Contact SUBCON-PLUS-CAN/PG Series 2.77mm Pitch 9 Way Straight Male to Female Screw Terminal D-sub Connector

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specifications
Attribute Value
Gender Male to Female
Number of Contacts 9
Body Orientation Straight
Pitch 2.77mm
Contact Material Copper Alloy
Housing Material Metal Plated ABS
Current Rating 100mA
Voltage Rating 50 V
Dimensions 58 x 39.4 x 16.6mm
Mounting Type Cable Mount
Series SUBCON-PLUS-CAN/PG
Depth 16.6mm
Minimum Operating Temperature -20°C
Width 39.4mm
Maximum Operating Temperature +75°C
Length 58mm
3 : Next working day (AU stock)
32 : 5 working days (Global stock)
Price (ex. GST) Each
$ 91.73
(exc. GST)
$ 100.90
(inc. GST)
units
Per unit
1 - 24
$91.73
25 - 74
$84.39
75 - 199
$82.70
200 - 399
$81.05
400 +
$79.43
Related Products
TE Connectivity PIDG Knife Disconnect Wire Crimp Terminal ...
Description:
TE Connectivity PIDG Knife Disconnect Wire Crimp Terminal PIDG knife disconnect wire crimp terminals consisting of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping This barrel is enclosed in a copper sleeve ...
Product Type=Connector, Connector Style=Receptacle, Connector System=Cable-to-Cable, Shell Size=5, ...
Description:
Product Type=Connector, Connector Style=Receptacle, Connector System=Cable-to-Cable, Shell Size=5, Sealable=No, Preloaded=No, Number of Positions=50, Power/Signal/Coax Combination=No, Retention Clip Material=Stainless Steel, Non-Magnetic=No, Contact Type=Socket, Contact Style=Socket, Contact Size=20, Contact ...
Product Type=Cable Assembly, Connector Style=Receptacle, Connector System=Cable-to-Cable, Shell ...
Description:
Product Type=Cable Assembly, Connector Style=Receptacle, Connector System=Cable-to-Cable, Shell Size=4, Sealable=No, Preloaded=No, Number of Positions=37, Power/Signal/Coax Combination=No, Retention Clip Material=Stainless Steel, Non-Magnetic=No, Contact Style=Socket, Contact Size=20, Contact Current Rating ...
WWK and WK Initiator Terminals WWK 2,5-3 D/U ...
Description:
WWK and WK Initiator Terminals WWK 2,5-3 D/U /V0 Initiator terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 25 sq.mm, width 6 mm, colour gray. (See RS Stock No. 865-1340)WK 2,5-3 D ...