RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

ABB Pluto 2TLA Series Safety Controller, 8 Safety Inputs, 4 Safety Outputs, 24 V dc


8 In stock for delivery within 7 working day(s)
Add to Basket

Price (ex. GST) Each

$1,798.00

(exc. GST)

$1,977.80

(inc. GST)

units

Added

RS Stock No.:
733-4818
Mfr. Part No.:
2TLA020070R4600
Manufacturer:
ABB
unitsPer unit
1 +$1,798.00

ABB Safety PLC


The ABB Pluto 2TLA series safety controller is an 'all-master' safety PLC device. This simplifies safety systems for its consumers and achieves the highest safety category of 4, according to EN 954-1. All Pluto’s are master units and can see the other Pluto’s inputs, outputs, and global memories. This enables the Pluto to evaluate the information from the other Pluto's and take appropriate decisions concerning its own safety devices. The gateway units are available for several different bus systems. Most of the modules in this family have dual safety outputs, potential free or PNP types. Up to 32 Pluto units can be safely connected in a 2-wire bus system to communicate with a superior system via a gateway or HMI displays. Therefore, within a maximum extended system 1472, I/O's can be connected. Also, all input components may be connected in series for even more complexity and optimisation.

The IDFIX is an identification circuit that allows multiple Pluto’s to be identified when connected on a bus system. This module is available to distribute a Tina adapter such as can be used to connect external safety monitoring equipment.

Note:
The IDFIX device is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however, the absence of an IDFIX requires to be stated when programming the Pluto device).


Features and Benefits


8 safety inputs and 4 safety outputs
Simple and easy programming facilities
Easy to configure and install
Up to 640I/O's
High safety level
Free software available
Programming over the bus
35mm DIN rail mounting
PLC program within a network of Pluto devices
8 safety inputs and 4 safety outputs


Certifications


TUV certified
FS certified
CSA certified


AttributeValue
RangePluto
Series2TLA
Number of I/O20
Number of Safety Inputs8
Number of Safety Outputs4
Safety Category4
SILSIL 3
Supply Voltage24 V dc
Contact Current Rating1.5 A
Contact Voltage Rating250 V ac, 50 V dc
IP RatingIP20, IP40
Dimensions84 x 45 x 118 mm
Depth118mm
Width45mm
Length84mm