Kraus & Naimer Key Operator for use with Cam Switch

  • RS Stock No. 350-0856
  • Mfr. Part No. S0V750D/GBA002
  • Manufacturer Kraus & Naimer
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IE
Product Details

Kraus & Naimer Key Operator with Square Escutcheon

Kraus & Naimer's switch handle operator is predominantly used with switch bodies and legend plates. The strategically-structured handle features a square escutcheon, this can only be used with switch bodies that incorporate appropriate legend plates that fit.

Features & Benefits

• Suitable for use with cam switches
• Also suitable to use with up to 6 mm panel thickness
• Single hole panel mounting, 22.5 mm (square escutcheon)
• The front panel has an IP66 rating, this means that the key operator has protection against dust that may cause harm to the equipment. This rating also means that the operator is protected against low-pressure jets that are coming from all directions.
• This handle operator is a rotary switch accessory
• Supplied with two keys
• Comprised of a strong, robust material

Technical Specification
Series CA10 CA20 CA25 CAD11 CHR10 CG8
Insulation Voltage U, 690V 690V 690V 600 690 690
Thermal Current lth 20A 25A 32A 6A 20A 20A
Motor Rating AC-23A 7.5kW 11kW 15kW - 7.5kW 7.5kW
Motor Rating AC-3 5.5kW 7.5kW 11kW - 5.5kW 5.5kW
Switching Angle 60°          
Dims. (mm) 48 x 48mm          
Ambient temp. of stages 55°C during 24 hours with peaks up to 60°C at 100% load          
Protection IP20          
Legend Plate Silver with black text          
Standards IEC 947, EN 60947          
CA10, CA20, CA25 & CAD11 Series Open finger proof terminals accessible from the side to facilitate wiring. Captive plus-minus screws          
CHR10 Series For connection with ring type terminals. Open finger-proof terminals accessible while switch is being installed. Captive plus-minus screws located 90° apart from the terminal direction allowing for connection of wires without any interference with the terminal screws.          
CG8 Series Open finger-proof terminals accessible while the switch is installed. Captive plus-minus screws. Due to the arrangement of the terminals it is possible to install switches closely, side by side or to mount them directly at the cable trays          
Attribute Value
Accessory Type Key Operator
For Use With Cam Switch
48 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 96.63
(exc. GST)
$ 106.29
(inc. GST)
Per unit
1 +
Related Products
A range of control devices with an IP65 ...
A range of control devices with an IP65 protection rating and conforming to IEC 947-5-1. Standard fixing aperture is 16mm. Behind panel depth (including terminals) is only 49mm. ,The devices can be butted together allowing a greater number of devices ...
Black thumb-grip handle and silver escutcheon plateConform to ...
Black thumb-grip handle and silver escutcheon plateConform to IEC947/EN 60947Maximum panel thickness 5mm48 x 48mm switch front plateFinger-proof terminalsIP65 for flush mounting three- hole mounting and IP55 for 22.5mm hole mounting (supplied with adaptor for single 22.5mm hole mounting)Operating current: ...
For use with actuators such as RMQ Titan ...
For use with actuators such as RMQ Titan joyswitch and selector switches, typical stk. nos. 399-3214 & 536-3823Front panel mounting, retained in position by component.
Eaton’s Rotary Potentiometers enable a user to regulate ...
Eaton’s Rotary Potentiometers enable a user to regulate and change the current that flows through a circuit, these rotary potentiometers can be easily controlled through turning the spindle or knob. Panel mounting Rotary action twist to set value IP66 rating ...