Megger RCDT 310 RCD Tester 500mA AC Selective, DC Selective CAT III 300 V

  • RS Stock No. 712-5737
  • Mfr. Part No. RCDT310-EN-BS
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

RCDT310 & RCDT320 RCD Testers

Two RCD testers that comply with EN61557 for testing, measuring or monitoring of protective measures.

Tests 30mA, 100mA, 300mA and 500mA rated RCDs
1/2x I, I, 5x I tests standard, DC and selective RCDs
0° or 180° polarity tests on all RCDs
Selective breakers have a time delay in tripping. When selected, trip test times are extended and a 30s delay is allowed between the measurement of the fault voltage and the application of the test current
Selectable touch voltage inhibit and touch voltage display on the analogue bargraph
300Vac (25 to 45Hz) voltage measurement range
Clear 20mm high digit LCD display with analogue arc bargraph
Tough rubber armoured case with self-contained display cover that locks away underneath the instrument during use
Safety input terminal interlock - prevents unsafe connection of test leads
Safety lock-out prevents the test from operating when the circuit voltage is >300V

RCDT320 model additional features

10mA/1A RCD extended test capability
Backlit display and range selection ideal for low light environments
Ramp Test measures & displays the actual trip current of an RCD. Ideal for diagnosing nuisance tripping of RCDs
Auto testing allows remote testing from the RCD under test. The RCDT320 will automatically perform a 1//2 I, I and 5I test at both 0°and 180°. When the RCD trips the user resets it and the tester proceeds to the next test automatically. All results are displayed at the end of the test
25 to 450Hz Frequency measurement range
Optional 2-wire test leads supplied

3-phase safe - Meets the requirements of BSEN 61010-1 for safe connection to a 440V Installation Category III supply (300V phase to Earth)
Weatherproof to IP54
Dimensions (WxHxD): 190 x 75 x 140mm; Weight 980g

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Instructions, Mains plug test leads, 8 AA alkaline batteries, neck strap.

Specifications
Attribute Value
RCD Test Current 500mA
RCD Test Type AC Selective, DC Selective
Display Type LCD
Safety Category CAT III 300 V
Battery Type Rechargeable NiCd, Rechargeable NiMH
Battery Life 2000 Tests
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 980g
Height 78mm
Length 203mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -5°C
Model Number p RCDT 310
Width 148mm
Safety Category Voltage 300V
Temporarily out of stock - back order for despatch 14/02/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 929.00
(exc. GST)
$ 1,021.90
(inc. GST)
units
Per unit
1 +
$929.00
Related Products
Outstanding overload capacity — ideal for teaching and ...
Description:
Outstanding overload capacity — ideal for teaching and training Zero scale mark can be set at centre or on left Automatic battery switch-off
Automatic and manual measuring range selection Measurement of ...
Description:
Automatic and manual measuring range selection Measurement of AC and DC voltages Frequency and top value readings Actual value measurement (TRMS)Hold function Acoustic continuity test Measuring resistance
The CA 6030 differential tester combines optimum ease ...
Description:
The CA 6030 differential tester combines optimum ease of use with real metrological performances for testing compliance with the NFC 15-100 standard.Safe and direct connection to mains socket on the equipment being tested.Reliable measurements thanks to automatic permutation of L ...
The Kyoritsu KEW RCD 5410 tests rated residual ...
Description:
The Kyoritsu KEW RCD 5410 tests rated residual non-operating currents at x 1/2 Range, measuring RCD trip time at x 1 and x 5 Ranges It measures trip out current by varying current automatically. For remote testing, the 5410 enables ...