JG Speedfit PMTT22E Water Trap Tee PVC Pipe Fitting, 22mm dia.

  • RS Stock No. 340-6726
  • Mfr. Part No. PMTT22E
  • Manufacturer JG Speedfit
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Water Trap

Allows unrestricted air flow whilst preventing water flow
Moisture is retained in the line to be drawn off at suitable location

Air Ring Main System

The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points.

No need to prepare threaded pipe or apply solvent
Easy and quick to install, simple push-in connections
Safe, secure and leak-proof, ready for immediate use
Unique collet locking system holds tube firmly without deformation or flow restriction
Easy to disconnect and reconfigure the system
Instruction leaflet included

Temperature Range 0 to + 70°C
Working Pressure @ +23°C = 10 bar (145 psi)
Working pressure @ +70°C = 7 bar (101 psi)
Pipe tolerances: +0.05 to -0.10mm OD
Material, pipe: rigid (unplasticised) Nylon 12
Material, fittings: bodies engineering plastic (black acetal copolymer) or brass
'O' Rings: Nitrile rubber
Collets: acetal polymer with stainless steel teeth

Specifications
Attribute Value
Fitting Type Water Trap Tee
Compatible Pipe Size 1 22mm
Pipe Material CPVC
Thread Size 22mm
On back order for despatch 23/12/2019, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 13.11
(exc. GST)
$ 14.42
(inc. GST)
units
Per unit
1 - 4
$13.11
5 - 9
$12.80
10 - 24
$12.51
25 +
$12.21
Related Products
Adaptor nipple PVC-U ideally used in the water ...
Description:
Adaptor nipple PVC-U ideally used in the water treatment, shipbuilding and chemical process industries Thread BSP taper male to plain spigot Maximum working pressure 9 bar at 20°C.
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
Speedfit manufacture a wide range of connectors including ...
Description:
Speedfit manufacture a wide range of connectors including conventional straight and bent tap connectors The tap connector only requires a simple hand tightening to connect up a terminal tap, mixer or a float valve. An integral seal within the fitting ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...