JG Speedfit PM222222E 90° Stem Elbow PVC Pipe Fitting, 22mm dia.

  • RS Stock No. 340-6681
  • Mfr. Part No. PM222222E
  • Manufacturer JG Speedfit
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Stem Elbow

Air Ring Main System

The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points.

No need to prepare threaded pipe or apply solvent
Easy and quick to install, simple push-in connections
Safe, secure and leak-proof, ready for immediate use
Unique collet locking system holds tube firmly without deformation or flow restriction
Easy to disconnect and reconfigure the system
Instruction leaflet included

Temperature Range 0 to + 70°C
Working Pressure @ +23°C = 10 bar (145 psi)
Working pressure @ +70°C = 7 bar (101 psi)
Pipe tolerances: +0.05 to -0.10mm OD
Material, pipe: rigid (unplasticised) Nylon 12
Material, fittings: bodies engineering plastic (black acetal copolymer) or brass
'O' Rings: Nitrile rubber
Collets: acetal polymer with stainless steel teeth

Specifications
Attribute Value
Fitting Direction 90°
Fitting Type Stem Elbow
Compatible Pipe Size 1 22mm
Compatible Pipe Size 2 22mm
Pipe Material CPVC
Thread Size 22mm
162 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 3)
$ 7.037
(exc. GST)
$ 7.741
(inc. GST)
units
Per unit
Per Pack*
3 - 12
$7.037
$21.111
15 - 27
$6.727
$20.181
30 - 72
$6.44
$19.32
75 +
$6.12
$18.36
*price indicative
Related Products
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
Speedfit manufacture a wide range of connectors including ...
Description:
Speedfit manufacture a wide range of connectors including conventional straight and bent tap connectors. The tap connector only requires a simple hand tightening to connect up a terminal tap, mixer or a float valve. An integral seal within the fitting ...
Elbow 90° PVC-U, available in either metric or ...
Description:
Elbow 90° PVC-U, available in either metric or imperial versions. Suitable for use in the chemical processing, microelectronics, ship building and water treatment industries. Good chemical and corrosion resistance.