Greenlee Punch and Die Tool, Hydraulic, 25 Way D F 43.4 x 12.9mm

  • RS Stock No. 477-8729
  • Mfr. Part No. 50124749
  • Manufacturer Greenlee
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

D Connector Cutters

Hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6 mm (16 swg) and aluminium up to 2mm (14 swg). Long life punches. Minimum burr, distortion or surface damage. Easy to dismantle - slugs drop freely out of die. Can be used with the hydraulic pump/cylinder Stock no 605-223. Not suitable for the lever presses.

Includes drilling jig for mounting holes
Pilot hole 8mm
M8 ball race supplied

Note

Front mounting dimensions permit adequate clearance where 'harness through' assembly of connector and wiring is required. Rear mounting dimensions are recommended for standard assembly.

//media.rs-online.com/t_line/L548300-01.gif
//media.rs-online.com/t_line/LD477869-01.gif
Specifications
Attribute Value
Hole Shape 25 Way D F
Operation Hydraulic
Hole Size 43.4 x 12.9mm
Cutting Capacity Mild Steel: 1.6 mm
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 328.55
(exc. GST)
$ 361.41
(inc. GST)
units
Per unit
1 +
$328.55
Related Products
Fully hardened and tempered tool steel punches and ...
Description:
Fully hardened and tempered tool steel punches and dies for accurate, clean hole punching in a wide range of materials. Dies are counterbored to prevent material build up. For accurate hole alignment, smaller punches (3 to 12 mm) include a ...
Square, rectangular and radius (rounded corner) hole cutters ...
Description:
Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 ...
Hole cutters for use specifically with the hydraulic ...
Description:
Hole cutters for use specifically with the hydraulic pump/cylinder stock no. 605-223. Punches and dies designed to cut mild steel and aluminium up to 3mm (10 swg) thick. The larger hole cutters are particularly useful when panel mounting fans and ...
Round knockout punches used to punch holes in ...
Description:
Round knockout punches used to punch holes in most panel materials, except stainless steel or other hardened metals. The knockout punches are designed for use with DMR20 series panel meters from Murata. • Punch up to 30 mm hole• Acceptable ...