RS PRO Punch and Die Tool, Hand, Rectangular 15.9 x 13mm

  • RS Stock No. 545-323
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Square, Rectangular and Radius Hole Cutters

Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 swg/1.22mm mild steel)

Long life punches with minimum burr, distortion or surface damage
Easy to dismantle - slugs drop freely out of die
Most punches can be used with the hydraulic pump/cylinder Stock no 605-223 or hydraulic hand punch kit Stock no 388-3628 up to 35mm/1 1/4 in diameter (See comparison table for exceptions). Not suitable for lever presses
Ball race included

Specifications
Attribute Value
Hole Shape Rectangular
Operation Hand
Hole Size 15.9 x 13mm
Cutting Capacity Mild Steel: 1.6 mm; Aluminium: 2 mm
Discontinued product
Related Products
Circular hole cutters suitable for use on mild ...
Description:
Circular hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg). Long life punches. Minimum burr, distortion or surface damage. Easy to dismantle - slugs drop ...
Hardened and tempered tool steel punches and dies ...
Description:
Hardened and tempered tool steel punches and dies to be used on the 3000lb press for punching recommended 'D' connector panel mounting holes. Connector and screw mounting holes are punched in a single operation, no drilling jigs required. See comparison ...
Description:
Will punch up to 3.5mm in mild and stainless steel, fibreglass/plasticsSplit slugs fall free and cannot cling to draw studGreatly increased life expectancy compared to standard punchesAvailable in 16 sizes including Pg and ISO sizesUse size 1 draw bolt for ...
Use to punch burr-free holes for switches and ...
Description:
Use to punch burr-free holes for switches and instruments in enclosures. Die alignment marks for accurate alignmentPunch up to 3.0mm mild steel and up to 1.5mm stainless steel (punching stainless steel reduces lifetime of punches)Supplied complete with punch, die, draw ...