RS PRO Punch and Die Tool, Hand, Rectangular 28 x 21mm

  • RS Stock No. 543-614
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Square, Rectangular and Radius Hole Cutters

Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 swg/1.22mm mild steel)

Long life punches with minimum burr, distortion or surface damage
Easy to dismantle - slugs drop freely out of die
Most punches can be used with the hydraulic pump/cylinder Stock no 605-223 or hydraulic hand punch kit Stock no 388-3628 up to 35mm/1 1/4 in diameter (See comparison table for exceptions). Not suitable for lever presses
Ball race included

Specifications
Attribute Value
Hole Shape Rectangular
Operation Hand
Hole Size 28 x 21mm
Cutting Capacity Mild Steel: 1.6 mm; Aluminium: 2 mm
Discontinued product
Related Products
Circular hole cutters suitable for use on mild ...
Description:
Circular hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg). Long life punches. Minimum burr, distortion or surface damage. Easy to dismantle - slugs drop ...
Round knockout punches used to punch holes in ...
Description:
Round knockout punches used to punch holes in most panel materials, except stainless steel or other hardened metals. The knockout punches are designed for use with DMR20 series panel meters from Murata. • Punch up to 30 mm hole• Acceptable ...
Slug buster are round and special shape punches ...
Description:
Slug buster are round and special shape punches with a unique profile for slug splitting, allowing easy slug removal. Slug buster punches are usually suitable for mild steel, plastic and aluminium up to 3.5mm thick. Their application is also for ...
High quality punches for D connector cut-outs. Fast ...
Description:
High quality punches for D connector cut-outs. Fast accurate panel punchingCapacity up to 1.6mm mild steelBall bearing draw stud to minimise working force requiredFor hydraulic operation with punch driver stock no. 363-0632 use adaptor stock no. 478-0615.