RS PRO Punch and Die Tool, Lever Press, Circular 4mm

  • RS Stock No. 541-905
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Circular Hole Punches and Dies Tool Steel

Fully hardened and tempered tool steel punches and dies for accurate, clean hole punching in a wide range of materials. Dies are counterbored to prevent material build up. For accurate hole alignment, smaller punches (3 to 12 mm) include a fixed centre location point. Larger punches (12.5 to 25 mm) have a retractable spring loaded centering pin. See table below for max. material thicknesses

Punch & Die Set Maximum Thickness      
  3000lb Press   5000lb Press  
  Steel Aluminium Steel Aluminium
3 to 5mm 1.6 2.5 1.6 2.5
6 to 10mm 1.6 2.5 2 3
Specifications
Attribute Value
Hole Shape Circular
Operation Lever Press
Hole Size 4mm
Cutting Capacity Steel: 2 mm; Aluminium: 3 mm
7 In stock for delivery within 5 working day(s)
Price (ex. GST) 1 Set
$ 35.56
(exc. GST)
$ 39.12
(inc. GST)
Set(s)
1 +
$35.56
Related Products
This RS Pro DIN Rail cutter has a ...
Description:
This RS Pro DIN Rail cutter has a top hat designed to be used with presses up to 3000 lbs. Not only can this cutter make precise and clean cuts, but it can pierce mounting holes into the DIN Rail. ...
A range of case hardened steel, rectangular punches ...
Description:
A range of case hardened steel, rectangular punches and dies to be used with 3000lb lever press having dedicated sizes for panel mounting rocker switches and IEC chassis connectors. Offers the same accurate and clean hole punching capacity as the ...
Square, rectangular and radius (rounded corner) hole cutters ...
Description:
Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 ...
Hole cutters for use specifically with the hydraulic ...
Description:
Hole cutters for use specifically with the hydraulic pump/cylinder stock no. 605-223. Punches and dies designed to cut mild steel and aluminium up to 3mm (10 swg) thick. The larger hole cutters are particularly useful when panel mounting fans and ...