RS PRO Punch and Die Tool, Hand; Hydraulic, Square 19.1 x 19.1mm

  • RS Stock No. 541-286
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Square, Rectangular and Radius Hole Cutters

Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 swg/1.22mm mild steel)

Long life punches with minimum burr, distortion or surface damage
Easy to dismantle - slugs drop freely out of die
Most punches can be used with the hydraulic pump/cylinder Stock no 605-223 or hydraulic hand punch kit Stock no 388-3628 up to 35mm/1 1/4 in diameter (See comparison table for exceptions). Not suitable for lever presses
Ball race included

Specifications
Attribute Value
Hole Shape Square
Operation Hand; Hydraulic
Hole Size 19.1 x 19.1mm
Cutting Capacity Mild Steel: 1.6 mm; Aluminium: 2 mm
Discontinued product
Related Products
'V' bending jaws for use with the 3000 ...
Description:
'V' bending jaws for use with the 3000 lb press,for the creation of bends of up to 90° in small boxes, brackets, etc. The raised base allows return folds to be made close together. Five blades are supplied of lengths ...
Circular hole cutters suitable for use on mild ...
Description:
Circular hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg). Long life punches. Minimum burr, distortion or surface damage. Easy to dismantle - slugs drop ...
Hardened and tempered tool steel punches and dies ...
Description:
Hardened and tempered tool steel punches and dies to be used on the 3000lb press for punching recommended 'D' connector panel mounting holes. Connector and screw mounting holes are punched in a single operation, no drilling jigs required. See comparison ...
Round knockout punches used to punch holes in ...
Description:
Round knockout punches used to punch holes in most panel materials, except stainless steel or other hardened metals. The knockout punches are designed for use with DMR20 series panel meters from Murata. • Punch up to 30 mm hole• Acceptable ...