RS PRO Punch and Die Tool, Hand, Rectangular 36.9 x 21.1mm

  • RS Stock No. 541-270
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Square, Rectangular and Radius Hole Cutters

Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 swg/1.22mm mild steel)

Long life punches with minimum burr, distortion or surface damage
Easy to dismantle - slugs drop freely out of die
Most punches can be used with the hydraulic pump/cylinder Stock no 605-223 or hydraulic hand punch kit Stock no 388-3628 up to 35mm/1 1/4 in diameter (See comparison table for exceptions). Not suitable for lever presses
Ball race included

Specifications
Attribute Value
Hole Shape Rectangular
Operation Hand
Hole Size 36.9 x 21.1mm
Cutting Capacity Mild Steel: 1.6 mm; Aluminium: 2 mm
Discontinued product
Related Products
Square shaped nibbling tools for cutting holes in ...
Description:
Square shaped nibbling tools for cutting holes in sheet material 5mm x 5mm (see additional information table with press stock no. 541-309 for cutting capacity). Use in conjunction with dieholder stock no. 541-719 .
A range of case hardened steel, rectangular punches ...
Description:
A range of case hardened steel, rectangular punches and dies to be used with 3000lb lever press having dedicated sizes for panel mounting rocker switches and IEC chassis connectors. Offers the same accurate and clean hole punching capacity as the ...
Fully hardened and tempered tool steel punches and ...
Description:
Fully hardened and tempered tool steel punches and dies for accurate, clean hole punching in a wide range of materials. Dies are counterbored to prevent material build up. For accurate hole alignment, smaller punches (3 to 12 mm) include a ...
Hole cutters for use specifically with the hydraulic ...
Description:
Hole cutters for use specifically with the hydraulic pump/cylinder stock no. 605-223. Punches and dies designed to cut mild steel and aluminium up to 3mm (10 swg) thick. The larger hole cutters are particularly useful when panel mounting fans and ...