Terasic P0039 SDI to HSMC Adapter Board

  • RS Stock No. 768-9035
  • Mfr. Part No. P0039
  • Manufacturer Terasic
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Terasic SDI HSMC Board

The Transceiver Serial Digital Interface (SDI) HSMC board provides a hardware platform for developing video broadcasting systems. It is intended to be used by customers to implement and design SDI and AES systems based on transceiver-based host boards with an HSMC interface. It can also be part of an openly sold Development Kit, or bundled with packages of software and IP cores.

2 x SDI transmit (TX) channels with SDI cable tri-speed drivers
2 x SDI receive (RX) channels with SDI cable equalizers
2 x 75Ω BNC SDI TX interfaces
2 x 75Ω BNC SDI RX interfaces
Adjustable 1.1 to 1.8V and standard 3.3V CMOS Input Signal Levels
2 x RS-422 transceivers for AES3 TX and AES3 RX channels
2 x 75Ω BNC AES3 RX interfaces
2 x 75Ω BNC AES3 TX interfaces
High frequency switching regulator for 12V to 5V power supply conversion
3 x linear regulators for 5V to 3.3V low noise power supply conversion
FDTIM analysis for power distribution network (PDN) decoupling
SDI multi-frequency VCXO femto clock video PLL
98.304MHz / 90.3168MHz / 122.88MHz / 112.896MHz voltage-controlled crystal oscillator (VCXO) based phase-locked loop (PLL)
LVPECL differential clock buffer with two differential outputs - HSMC and SMA
4 x digital audio isolation transformers
Multi-format video sync separator
HSMC connector for interface conversion, fully compatible with HSMC host boards

Supplied with

System CD ROM

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Kit Classification Adapter Board
Kit Name SDI to HSMC
On back order for despatch 12/08/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 859.03
(exc. GST)
$ 944.93
(inc. GST)
units
Per unit
1 +
$859.03
Related Products
Bar Graph click mikroBUS™ The Bar Graph click ...
Description:
Bar Graph click mikroBUS™ The Bar Graph click add-on board has been specially designed to incorporate a ten-segment light bar display to your design - great for VU metersKey Features of the Bar Graph click•mikroBUS™ pinout standard•JSB-R102510Z light bar display•2 ...
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
Thunder click mikroBUS™ The Thunder click is an ...
Description:
Thunder click mikroBUS™ The Thunder click is an add-on board with a great safety feature in the detection of nearby lightning - perfect for applications such as weather stations, watches, sports equipment, UPS and GPSKey Features & Benefits of the ...
Evaluation Board with STM32L476ZG Microcontroller The Evaluation Board ...
Description:
Evaluation Board with STM32L476ZG Microcontroller The Evaluation Board STM32L476G-EVAL is a complete demonstration and development platform for STMicroelectronics ARM® Cortex®-M4 core-based STM32L476ZGT6 microcontroller The device features three I²C, three SPI, six USART, CAN, Single Wire Protocol Master Interface ...