- RS Stock No.:
- 901-1330
- Mfr. Part No.:
- MFT1825-AU
- Brand:
- Megger
- RS Stock No.:
- 901-1330
- Mfr. Part No.:
- MFT1825-AU
- Brand:
- Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Product Details
MFT1825 Multifunction Tester (AU Version)
The MFT1825 Multifunction Tester (AU Version) is designed for testing low voltage electrical installations to IEC 60364. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The MFT1825 brings Type B RCD testing, 3-pole earth electrode testing with attached rod technique and stakeless testing to a downloading and rechargeable instrument.
Simple colour-coded test selection and large clear backlit display for ease of use
Two and three wire non-trip loop testing for RCD protected circuits
Internal memory and Bluetooth® communications
Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
3-terminal earth test and stakeless testing for spike resistance measurement
EN61010 CATIV safety ratings and tough IP54 case
Two and three wire non-trip loop testing for RCD protected circuits
Internal memory and Bluetooth® communications
Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
3-terminal earth test and stakeless testing for spike resistance measurement
EN61010 CATIV safety ratings and tough IP54 case
Supplied with
MFT1825 Multifunction Tester, Switched probe SP5, Neck strap - Megger embroidered, 3 Wire lead set with prods and clips, AU/NZ plug test lead and AC battery charger.
Specifications
Attribute | Value |
---|---|
Loop Impedance Test Type | 2 Wire, 3 Wire |
Automatic RCD Test | Yes |
Model Number p | MFT1825 |
RCD Ramp Test | Yes |
Non-Tripping | Yes |
Insulation Test Voltage | 1000V |
Maximum Voltage Measurement | 600V |
Test Type | Continuity, RCD |
Earth Resistance Measurement | Yes |
Downloadable Data | Yes |
Interface Type | Australia Mains |
Continuity Test Current | 205 mA @ 0 → 2 Ω |
RCD Test Type | AC, B |
Test Standards | IEC 60364 |
IP Rating | IP54 |
Weight | 1 (with Battery)kg |
Height | 85mm |
Width | 150mm |
Length | 235mm |
Safety Category Level | CAT III, CAT V |
Power Source | Battery |
Minimum Operating Temperature | -10°C |
Maximum Operating Temperature | +55°C |
Minimum Continuity Resistance | 0.01Ω |
Display Type | Backlight |
Dimensions | 235 x 150 x 85mm |
Safety Category | CAT III 600 V, CAT V 300 V |
Battery Type | Rechargeable |
Plug Type | Australia, New Zealand |
Maximum Continuity Resistance | 99.9kΩ |
Safety Category Voltage | 300 V, 600 V |