Weidmuller, End Plate, SAK Series

  • RS Stock No. 755-3725
  • Mfr. Part No. AP SAK4-10 KRG -117920000
  • Manufacturer Weidmuller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): HU
Product Details

SAK TS35 Range

High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 with a working temperature of -50°C to +100°C, and meet the requirements of IEC 60947-1.

Features and Benefits

• AP SAK End plates available in 4 sizes to suit 2.5 mm² to 35 mm² terminals • Partitions available in both beige (RS 755-3725) and blue (RS 718-0914, RS 718-0923, RS 718-0926)
• Flammability class UL 94V-2
• Clamping yoke technology

Approvals

CSA certified, UL listed, NEMKO, ATEX, and IECEx

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specifications
Attribute Value
Accessory Type End Plate
Series SAK
For Use With Terminal Block
80 : Next working day (AU stock)
440 : 5 working days (Global stock)
Price (ex. GST) Each (In a Pack of 10)
$ 1.174
(exc. GST)
$ 1.291
(inc. GST)
units
Per unit
Per Pack*
10 +
$1.174
$11.74
*price indicative
Related Products
SAKS screw cap: This features a red screw ...
Description:
SAKS screw cap: This features a red screw fit, finger release fuse carrier to suit BS1362ASK1 lever: This features a lever fuse cartridge carrier which accepts 20x5mm fuse links. A window in the top of the carrier enables inspection of ...
For the termination of 3 wire sensors Common ...
Description:
For the termination of 3 wire sensors Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
For the termination of 3 wire sensors Common ...
Description:
For the termination of 3 wire sensors Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Terminal block with two separate tiers offering maximum ...
Description:
Terminal block with two separate tiers offering maximum space savingThis terminal block is fitted to a 15mm miniature DIN profile but may also be used on the 35mm omega profile.An end cover, and an intermediate plate to offset lateral shift ...