ABB 2TLA020054R0300 Connection Block, For Use With Pluto Safety Controller

  • RS Stock No. 733-2477
  • Mfr. Part No. 2TLA020054R0300
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Pluto Safety PLC, Base Unit

Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.

Simple and easy programming facilities
Easy to configure and install
Up to 640 I/O's
Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number (733-4842)
High safety level
Free software available
Programming over the bus
35 mm DIN rail mounting
The IDFIX (733-4824) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices.
Tina adapters such as (733-2477) can be used to connect external safety monitoring equipment


The IDFIX device (733-4824) is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however the absense of an IDFIX requires to be stated when programming the Pluto device.)




European Machinery Directive 2006/42/ECEN ISO 12100-1, EN ISO 12100-2,EN 60204-1, EN 954-1, EN ISO 13849-1,EN 62061

Attribute Value
Accessory Type Connection Block
For Use With Pluto Safety Controller
Connector Size M12 5-pin
7 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 287.69
(exc. GST)
$ 316.46
(inc. GST)
Per unit
1 +
Related Products
Anchor plate with permanent magnet Holding force: 30N. ...
Anchor plate with permanent magnet Holding force: 30N. Delivered with cellular rubber. A permanent magnet keeps the door/hatch closed when the Magne is unlocked. The door can still easily be opened.
Suitable for use with the m Gard Trapped ...
Suitable for use with the m Gard Trapped Key range and the Am Gard Machine Guard switch range Stainless steel construction and individually coded keys:492-2976 code A492-3165 code B492-3171 code C492-3187 code D492-3193 code E492-3216 code F492-3222 code G492-3238 code ...
Long life - up to 1 million mechanical ...
Long life - up to 1 million mechanical operations Double insulated3 cable entries M16 x 15Large wiring compartment High level of contact reliability with low voltages and currents Patented roller system - not sensitive to dirty conditions Slotted holes for ...
This range of Head Emergency Buttons are used ...
This range of Head Emergency Buttons are used in control cabinets, control panels, in elevator construction, on conveyor or transport plants After the manual actuation, the components initiate or switch off work processes and functional processes.The range of NDR Series ...