RS PRO 6871 Series Momentary Air Switch, 250mm Fly Lead, Surface Mounted

  • RS Stock No. 319-708
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Air Operated Switches, 1 Pole Elements, Surface Mount/Through Panel

Introducing the series of excellent quality Air Switches from RS PRO. Air switches are a type of push button switch that uses air pressure instead of electricity to activate the device it is connected to. This series of single-pole momentary or latching air-operated switches are suitable for use with all air actuators and accessories.

Air Switches are available in two mounting options:

• Surface mounting with side connection of the air tube: 319-714 & 319-708
• Through panel fixing with the air tube connection via the base: 319-720 & 319-736

The Surface Mounting type is ideal where it is required to seal all electrical connections from the environment in an enclosure. Through panel, fixing is by means of a 9/16 UNF nut (supplied) or may be surface mounted using the additional 3.2mm dia fixing holes, suitable for M3 or No. 6 self-tapping screws. SPDT microswitch contacts are rated at 16A 250 Vac/30Vdc and connection is via 250 ( 1/4 in) terminals. Operating temperature range -10°C to +60°C (subject to tube length limitations - see additional data tables below)

Features and Benefits:

Single-pole momentary or latching air-operated switch suitable for use with all air actuators and accessories
Two types are available, surface mounting with side connection of the air tube or through panel fixing with the air tube connection via the base
The latter type is ideal where it is required to seal all electrical connections from the environment in an enclosure
Through panel fixing is by means of a 9/16 UNF nut (supplied) or may be surface mounted using the additional 3.2mm dia fixing holes, suitable for M3 or No. 6 self-tapping screws
SPDT microswitch contacts are rated at 15A 250 Vac/30Vdc and connection is via 250 ( 1/4 in) terminals. Operating temperature range -10°C to +60°C (subject to tube length limitations - see additional data tables)

Typical Application:

The air switch works in a similar way to electrical switch but instead of electricity, it uses air pressure. When the air switch button is pressed it triggers a pulse of air towards the power control unit. The air goes through tubing connected between the button and the control unit. Once the control unit receives the "air signal", it turns on the power. To turn off, the button needs to be pressed again.

They are usually used for:

• Safe actuation of electrical devices in hazardous environments or in close proximity to water
• Actuation of sensitive electrical circuits

Approvals

UL; CSA

Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Specifications
Attribute Value
Manufacturer Series 6871
Type Momentary
Mounting Type Surface
Operation SPCO
Fly Lead Length 250mm
For Use With Battery Charging Rooms, Garages or Wherever Explosive Gases, Laboratories, Vapours or Powders May Exist, 3 mm I/D Tubing
9 : Next working day (AU stock)
399 : 5 working days (Global stock)
Price (ex. GST) Each
$ 20.94
(exc. GST)
$ 23.03
(inc. GST)
units
Per unit
1 - 14
$20.94
15 - 49
$20.22
50 +
$19.97
Related Products
Low profileCE and RoHS compliant Can copy up ...
Description:
Low profileCE and RoHS compliant Can copy up to 10 switches simultaneously Multi-angle indicators Suitable for a range of different mounting options including direct, panel and DIN rail mountingIP40 rated enclosure
CTS 254 Series ultra-miniature joysticks are the smallest ...
Description:
CTS 254 Series ultra-miniature joysticks are the smallest joysticks available, offering an unrivalled solution to space-critical applications The 254 series are also very robust and can easily take daily usage, providing a long life switching product with up to 1 ...
The compact 16 mm Series 61 is especially ...
Description:
The compact 16 mm Series 61 is especially suited for:Flush design Raised designPCB (with adaptor)The modular design caters to a Broad range of applications and combinationsThe EAO Series 61 is especially suited for applications in the segments:Public transportation Machinery and ...
Snap-fitting actuator accepts standard caps Sealed against solder ...
Description:
Snap-fitting actuator accepts standard caps Sealed against solder & cleaning processes Thru-hole and surface mount models Telecommunications & networking equipment Instrumentation & controls Computers & peripherals