Crouzet Current Monitoring Relay with SP-NO/NC Contacts, 24 → 240 V ac/dc

  • RS Stock No. 261-959
  • Mfr. Part No. 84871122
  • Manufacturer Crouzet
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MIC series current control relay

Alternating current control.
Built-in current transformer.
Measurement ranges from 2 A → 20 A.
Choice of output relay action.
Measurement in true RMS.

Operating voltage: 24 V → 240 Vac / Vdc (-15% / +10%)
Measurement range: 2 → 20 A
continuous overload (°25@C): 100 A
Measured signal frequency: 40 → 70 Hz sinusoidal
Measurement cycle (max.): 30 msec / Measurement in true RMS
Threshold setting: 10 → 100% of the range
Response time: 200 ms
Start delay: 500 ms
Output: 1 single changeover relay
Cut-off voltage (max.): 250 Vac / Vdc
Cut-off current (max.): 5 A AC / DC
Cut-off current (min.): 10 mA / 5 Vdc
Electrical durability: 1 x 105 operations
Rate (max.): 360 operations / hour at full charge
Enclosure: 17.5 mm
Operating temperature: IEC 60068-2 -20 → +50 °C
Approvals: UL, CSA
Specifications
Attribute Value
Monitoring Application Current
Supply Voltage 24 → 240 V ac/dc
Contact Configuration SP-NO/NC
Current Sensitivity Overcurrent, Undercurrent
Minimum Current Sensed 2A
Maximum Current Sensed 20A
Time Delay 500 ms
Maximum Operating Temperature +50°C
Operating Temperature Range -20 → +50 °C
Length 97mm
Current Range 2 → 20 A
Width 17.5mm
Minimum Operating Temperature -20°C
Dimensions 97 x 17.5 x 90 mm
Height 90mm
9 : Next working day (AU stock)
64 : 5 working days (Global stock)
Price (ex. GST) Each
$ 226.36
(exc. GST)
$ 249.00
(inc. GST)
units
Per unit
1 +
$226.36
Related Products
Schneider Electric RM17 JC current control relay for ...
Description:
Schneider Electric RM17 JC current control relay for controlling alternating currents in the event of overcurrent. Built-in current transformer with a wide measurement range. Monitors heating and lighting circuits and motor and generator load status. Checks its own power supply. ...
Schneider Electric RM35 UA multifunction current control relays ...
Description:
Schneider Electric RM35 UA multifunction current control relays monitor both AC and DC currents. Featuring automatic current recognition for overcurrent and undercurrent moniotoring. Checks its own power supply. Clear hinged front coverLED display of output statusDIN Rail mounting.
Controls overspeed, underspeed, operating rate, stopping.Measurement via On-Off ...
Description:
Controls overspeed, underspeed, operating rate, stopping.Measurement via On-Off sensors, three-wire PNP or NPN, Namur, voltage 0 → 30 V or volt-free contact type.Works with either NO or NC sensors.Time between pulses adjustable from 0.05 sec to 10 min.Power-on inhibit time, ...
TELE GAMMA series AC/DC current monitoring for single ...
Description:
TELE GAMMA series AC/DC current monitoring for single phase. Featuring overcurrent and undercurrent monitoring and two change over contacts. The GAMMA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED indicator. Screw terminals. Multifunction16.6 ...