Arduino MKR ZERO MCU Development Board ABX00012

  • RS Stock No. 169-7584
  • Mfr. Part No. ABX00012
  • Manufacturer Arduino
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Arduino MKR ZERO

Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.

What can you find on Arduino MKR ZERO board?

• Onboard SD connector with SPI interface
• Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
• Onboard LED - connected to a dedicated pin (32)
• Vin pin - used to power the board with regulated 5V source
• 5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
• VCC pin - outputs 3.3V through on-board regulator
• LED ON - connected to the 5V input from either USB or VIN
• Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging

Features and Benefits

• 5V board power supply
• Li-Po single cell, 3.7V, 700mAh minimum battery
• DC Current for 3.3V/5V - 600 mA
• Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
• 22 digital pins
• Flash memory of 256 KB and 8 KB for bootloader
• 32 KB SRAM
• Full speed USB device and embedded Host

Specifications
Attribute Value
Classification Development Board
Kit Name MKR ZERO
Technology MCU
Processor Family Name ARM Cortex M0
Processor Part Number SAMD21
Processor Type MCU
4 : Next working day (AU stock)
17 : 5 working days (Global stock)
Price (ex. GST) Each
$ 34.67
(exc. GST)
$ 38.14
(inc. GST)
units
Per unit
1 - 9
$34.67
10 - 49
$33.98
50 +
$33.30
Related Products
Color click mikroBUS™ The Click accessory modules plug ...
Description:
Color click mikroBUS™ The Click accessory modules plug into the mikroBUS™ sockets in Mikro Elektronika microcontroller development boards Color click™ offers a solution of adding colour sensing to your design. The accessory board features an RGB LED diode and the ...
The Seeed studio grove-touch sensor is a simple ...
Description:
The Seeed studio grove-touch sensor is a simple capacitive touch sensor module This touchpad detector IC offers 1-touch key. This replaces the traditional direct button key with diverse pad size. It is used to measure the capacitance of a metallic ...
Flash click mikroBUS™ The Flash Click is an ...
Description:
Flash click mikroBUS™ The Flash Click is an accessory board for adding flash memory It features EN25F80 with 8 Mbit serial Flash memory module and advanced hardware write-protection mechanisms. It supports high-performance commands for clock frequency up to 75 MHz. ...
The Digilent Zybo Z7-10 is a feature-rich, ready-to-use ...
Description:
The Digilent Zybo Z7-10 is a feature-rich, ready-to-use embedded software and digital circuit board built around the Xilinx Zynq-7000 family The Zynq family is based on the Xilinx all programmable system-on-chip (AP SoC) architecture that tightly integrates a dual-core ARM ...