Telemecanique Sensors Differential for Hydraulic Fluid Pressure Sensor, 160bar Max Pressure Reading , 120 → 240

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

OsiSense XMLA Pressure Switches

Schneider Electric XMLA pressure switches for control circuits are used to control the pressure of hydraulic oils, fresh water, sea water, air, steam, corrosive fluids, or viscous products. The XMLA pressure and vacuum switches have a fixed differential and are for detection of a single threshold.

Fixed differential
External pressure setting window available
1 NO & 1 NC snap acting contacts
Temperature range: –25 to +70 °C
Enclosure rating: IP65 with plug-in connector, IP66 with terminal connections
Operating rate: up to 120 operations / min. for diaphragm and 60 / min. for piston
Media connection: 1/4" NPT
Conduit connection: 1/2" NPT

Note

Pressure quoted is 'per cycle' and (occasional)

Specifications
Attribute Value
Pressure Reading Type Differential
Minimum Pressure Reading 10bar
Maximum Pressure Reading 160bar
Accuracy 2 %
Output Type Relay
Media Measured Hydraulic Fluid
Process Connection G1/4
Electrical Connection PG13.5 Cable Gland
Maximum Current 3 A ac, 100 mA dc
Supply Voltage 120 → 240 V ac, 250 V dc
Housing Material Zinc Alloy
IP Rating IP66
Maximum Operating Temperature +70°C
Minimum Operating Temperature -25°C
22 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 303.81
(exc. GST)
$ 334.19
(inc. GST)
units
Per unit
1 - 2
$303.81
3 - 3
$265.83
4 +
$251.87
Related Products
Osisense XMP pressure sensors are for control circuits ...
Description:
Osisense XMP pressure sensors are for control circuits and are used to control the pressure of water (sea and fresh) and air XMP series pressure sensors have an adjustable differential and are for regulation between two thresholds. Diaphragm pressure actuatorG ...
Schneider Electric XMLB pressure switches for control circuits ...
Description:
Schneider Electric XMLB pressure switches for control circuits are used to control the pressure of hydraulic oils, fresh water, sea water, air, steam, corrosive fluids, or viscous products The XMLB pressure and vacuum switches have an adjustable differential and are ...
Simple and robust construction Adjustable switching point through ...
Description:
Simple and robust construction Adjustable switching point through headless screw Suitable for compressed air, hydraulic oil, oil emulsions, water Available as NO, NC or changeover
Products are screw adjustable but are factory fitted ...
Description:
Products are screw adjustable but are factory fitted with specific pressure rated springs which are not interchangeable As the contact pressure is dependent on the air pressure, the switch rating will be reduced when used at the minimum operating pressures. ...