Smart High Side Switch ICs

  • RS Stock No. 184-8007
  • Mfr. Part No. BV1HD090FJ-CE2
  • Manufacturer ROHM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

BV1HD090FJ-C is an automotive 1ch high side switch IC, which has built-in overcurrent limiting circuit (OCP), thermal shutdown circuit (TSD), open load detection function (OLD) and under voltage lockout function (UVLO). It is also equipped with the diagnostic output when detecting an error (ST).

Built-in overcurrent limiting circuit (OCP)Built-in thermal shutdown circuit (TSD)Built-in open load detection function (at output OFF)Direct control enabled from CMOS logic IC, etc.Built-in under voltage lockout functionBuilt-in Output State PinOn-Resistance RON=90mΩ (Typ) (VBB=14V, Tj=25°C, IOUT=0.5A)Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chipEnables operation at low voltage down to 4.2V

Specifications
Attribute Value
Power Switch Type High Side Switch
Power Switch Topology High Side
Switch On Resistance 500mΩ
Number of Channels 1
Maximum Operating Supply Voltage 36 V
Maximum Operating Current 5.5A
Mounting Type Surface Mount
Package Type SOP
Pin Count 8
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Dimensions 4.9 x 3.9 x 1.37mm
Series IPS Series
Automotive Standard AEC-Q100
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each (On a Reel of 2500)
$ 1.58
(exc. GST)
$ 1.74
(inc. GST)
units
Per unit
Per Reel*
2500 +
$1.58
$3,950.00
*price indicative
Related Products
Linear Technology high voltage Surge Stopper devices for ...
Description:
Linear Technology high voltage Surge Stopper devices for the protection of loads from over-voltage and high voltage transient damage These products will find uses in a variety of applications, such as automotive, avionic, and industrial Surge Protection, Hot Swap™ and ...
DMOS transistor arrays suitable for driving multiple resistive ...
Description:
DMOS transistor arrays suitable for driving multiple resistive or inductive loads The TBD62083 series are octal N-channel MOSFET drivers with clamping diodes and common ground and supply pins. The inputs are compatible with low voltage driving sources.
The ecoSWITCH NCP45520, NCP45521 series of load management ...
Description:
The ecoSWITCH NCP45520, NCP45521 series of load management devices provide a component and area-reducing solution for efficient power domain switching with inrush current limit via soft start In addition to integrated control functionality with ultra low on-resistance these devices offer ...
The NCP434 and NCP435 are very low Ron ...
Description:
The NCP434 and NCP435 are very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy Indeed, thanks to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected ...