STMicroelectronics EV-VNH7070AS VNH7070AS Evaluation Board Evaluation Board for VNH7070AS, VNH7100AS

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

STMicroelectronics Evaluation Board

The STMicroelectronics evaluation board is a new age device that comes preassembled with H-Bridge. This on-board minimum set of electrical components enables the user to directly connect the load, the power supply and the microcontroller without any additional effort in external component design and connection. The device incorporates a dual monolithic high-side driver and two low-side switches. These switches are designed using ST proprietary VIPower® M0 technology that allows efficient integration on the same die a true Power MOSFET with an intelligent signal/protection circuitry.

Features and Benefits:

• On-state resistance (per channel) is 70mohm
• Operating voltage ranges between 4V and 28V
• Output current is 15A
• Provides electrical connectivity and thermal heat-sinking for easy prototyping
• Simple single IC application-board dedicated for VNH7070AS

Applications:

• DC-DC and DC-AC converters
• Factory automation
• Fans and pumps
• HID, ballasts
• Motor drivers for industrial and home appliances
• Power supply units

Specifications
Attribute Value
Kit Classification Evaluation Board
For Use With VNH7070AS H-Bridge
Featured Device VNH7070AS, VNH7100AS
Kit Name VNH7070AS Evaluation Board
On back order for despatch 24/09/2020, delivery within 7 working days from despatch date.
Price (ex. GST) Each
$ 7.44
(exc. GST)
$ 8.18
(inc. GST)
units
Per unit
1 +
$7.44
Related Products
STEVAL-ESC001V1 BLDC/PMSM Motor Speed Controller The STEVAL-ESC001V1 is ...
Description:
STEVAL-ESC001V1 BLDC/PMSM Motor Speed Controller The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM) It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and ...
Description:
The H-Bridge Kit 2GO is a ready to use evaluation kit It is fully populated with all electronic components equipped with the H-Bridge IFX9201 combined with XMC 1100 Micro controller based on ARM® Cortex®-M0 CPU. Realize your own DC motor ...
The NV705143R1DBGEVB is a form factor Reference Design ...
Description:
The NV705143R1DBGEVB is a form factor Reference Design for driving bipolar stepper motors The reference design can be interfaced via I/O pins and the SPI bus to an external microcontroller. In conjunction with the NCV7052xGEVK evaluation kit it forms a ...
The STEVAL-FCU001V1 is designed to support quadcopter drone ...
Description:
The STEVAL-FCU001V1 is designed to support quadcopter drone designers A complete sample FW project allows the designer to begin flying small and medium size quadcopters (with brushed or brushless DC motors) immediately and evaluate the performance of the IMU sensors ...