ON Semiconductor NCP1611GEVB Low Profile PFC Evaluation Board Boost Converter for NCP1611BDR2G for Low Profile PFC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The NCP1611 Evaluation Board implements a complete 160W/390 Vdc nominal Power Factor Correction Stage and operates from 90-265 Vac. The board illustrates a low profile (<13 mm height) that might be used in a flat TV or All-in-One PC Application. The target efficiency and power factor at full load for this board is >95% with a PF > 0.95 and meets EN61000-3-2 Class C and Class D requirements. The NCP1611 is active power factor corrected (PFC) controller specifically designed for use as a boost preconverter in ac-dc adapters, flat TVs, lighting ballasts and other medium powered offline applications.

Specifications
Attribute Value
Power Management Function Boost Converter
Kit Classification Evaluation Board
For Use With Low Profile PFC
Featured Device NCP1611BDR2G
Kit Name Low Profile PFC Evaluation Board
Discontinued product
Related Products
This evaluation board has been developed for ROHM’s ...
Description:
This evaluation board has been developed for ROHM’s synchronous buck DC/DC converter customers evaluating BD9A101MUV-LB While accepting a power supply of 2.7-5.5V, an output of 1.8V can be produced. The IC has internal 60mΩ high-side N-channel MOSFET and 60mΩ low-side ...
BD9B301MUV-LB is a synchronous buck switching regulator with ...
Description:
BD9B301MUV-LB is a synchronous buck switching regulator with built-in low on-resistance power MOSFETs This IC, which is capable of providing current up to 3A, features fast transient response by employing constant on-time control system. It offers high oscillating frequency at ...
Low cost, flicker-free, smart and connected single channel ...
Description:
Low cost, flicker-free, smart and connected single channel LED driver demonstrator15W Single Channel CCM DC/DC Buck converter in peak-current control mode Software-based automatic adaptation to different input DC voltages and LED forward voltages Isolated DALI Interface card DALI Software Stack ...
The NCP3064 device supports a buck configuration with ...
Description:
The NCP3064 device supports a buck configuration with a wide input voltage range The NCP3064 is a low cost converter that supports a peek current of 1.5A with a maximum duty cycle of 85.7%. The ON/OFF function allows turn the ...