STMicroelectronics STEVAL-ILL064V1 LED Driver for LED5000

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

3A LED Driver (LED5000 in BB- Boost Topology), STMicroelectronics

The STEVAL-ILL063V1 is an Evaluation Board based on the LED5000, a step-down current source with dimming capability. The adjustable output current is 3A DC maximum. A sensing resistor on the feedback pin sets the regulated output current level. The board is fully protected against over-heating, over-current and output short-circuit.

5.5V to 48V operating input voltage range
850kHz fixed switching frequency
200mV typ. current sense voltage drop
BB- boost topology
PWM dimming
±3% output current accuracy over temperature
200mOhm typical RDS(ON)
Compliant with ceramic output capacitors
Inhibit for zero current consumption
Thermal shutdown

LED Drivers, Lighting ICs, STMicroelectronics

Specifications
Attribute Value
Power Management Function LED Driver
Kit Classification Evaluation Board
Featured Device LED5000
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 63.75
(exc. GST)
$ 70.13
(inc. GST)
units
Per unit
1 +
$63.75
Related Products
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • ...
The STEVAL-ISA183V1 evaluation board implements a 16 W ...
Description:
The STEVAL-ISA183V1 evaluation board implements a 16 W triple output power supply designed in quasi-resonant flyback topology, specifically designed as an auxiliary PSU for air conditioning systems. The core of the application is the VIPER35LD high voltage converter from the ...
The NCP1406 is a monolithic micropower PFM step-up ...
Description:
The NCP1406 is a monolithic micropower PFM step-up DC-DC converter. This device is designed to boost single lithium or two cells AA/AAA battery voltage up to 25 V (with internal MOSFET) output for handheld applications. Target applications include OLED Power, ...
The NCP1422 is a monolithic, micro-power, high-frequency, step-up ...
Description:
The NCP1422 is a monolithic, micro-power, high-frequency, step-up switching converter IC designed for battery operated hand-held electronic products with up to 800 mA loading. It integrates a synchronous rectifier (Sync-Rect) to improve efficiency and to eliminate the external Schottky Diode. ...