Microchip Buck Converter for MCP16331

  • RS Stock No. 831-9002
  • Mfr. Part No. ADM00519
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP16331 Buck Converter Evaluation Board

The ADM00519 from Microchip is an evaluation board to demonstrate the capabilities of the MCP16331 Step-Down DC-DC converter with two selectable output voltages. Test points are provided for input and output allowing the board to be directly connected to a system. Also present are test points to gain access to the EN pin to modify the state of the converter and the SW pin to see the switching waveform.

Specifications
Attribute Value
Power Management Function Buck Converter
Kit Classification Evaluation Board
Featured Device MCP16331
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 50.85
(exc. GST)
$ 55.93
(inc. GST)
units
Per unit
1 +
$50.85
Related Products
BD9B301MUV-LB is a synchronous buck switching regulator with ...
Description:
BD9B301MUV-LB is a synchronous buck switching regulator with built-in low on-resistance power MOSFETs. This IC, which is capable of providing current up to 3A, features fast transient response by employing constant on-time control system. It offers high oscillating frequency at ...
The ISL95338 is a bidirectional, buck-boost voltage regulator ...
Description:
The ISL95338 is a bidirectional, buck-boost voltage regulator that provides buck-boost voltage regulation and protection features. Intersil’s advanced R3™ Technology is used to provide high light-load efficiency, fast transient response, and seamless DCM/CCM transitions. The ISL95338 takes input power from ...
The NCP3063 Series is a higher frequency upgrade ...
Description:
The NCP3063 Series is a higher frequency upgrade to the popular MC34063A and MC33063A monolithic DC-DC converters. These devices consist of an internal temperature compensated reference, comparator, a controlled duty cycle oscillator with an active current limit circuit, a driver ...
The NCP1608 is an active power factor correction ...
Description:
The NCP1608 is an active power factor correction (PFC) controller specifically designed for use as a pre-converter in ac-dc adapters, electronic ballasts, and other medium power off-line converters (typically up to 350 W). It uses Critical Conduction Mode (CrM) to ...