STEVAL-VP26K02F, VIPER26K Eval Board

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

The STEVAL-VP26K02F evaluation board implements a double output isolated SSR flyback specifically designed to supply smart meter and PLC systems.
The evaluation board has been developed using the VIPER267KDTR offline high-voltage converter which features a 1050 V avalanche-rugged power section, PWM operation at 60 kHz with frequency jittering for lower EMI, current limiting with 700 mA fixed set point, on-board soft-start, safe auto-restart after fault and low standby power.
The power supply provides 12 V at 700 mArms (1 A peak) to the power line modem (PLM) and the analog circuitry and 6 V at 200 mA to supply digital circuitry and other low voltage parts.
The power supply is designed to operate across a three-phase input mains from 50 to 290 VAC but can also be connected to a single phase mains from 85 to 500 VAC.

Double output voltage: 12 V at 0.7 Arms (1 A peak) and 6 V at 200 mA
Secondary side regulation (SSR)
Extended AC mains input voltage range: 85 to 500 VAC

Specifications
Attribute Value
Power Management Function Flyback Converter
Kit Classification Evaluation Board
Featured Device STEVAL-VP26K02F
Kit Name Isolated SSR Flyback
6 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 88.20
(exc. GST)
$ 97.02
(inc. GST)
units
Per unit
1 +
$88.20
Related Products
The 12V Protected switch shield for Arduino comes ...
Description:
The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 15mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive ...
Evaluation board for the NCP160 linear regulator capable ...
Description:
Evaluation board for the NCP160 linear regulator capable of supplying 250 mA output current Designed to meet the requirements of RF and analogue circuits, the NCP160 device provides low noise, high PSRR, low quiescent current, and very good load/line transients. ...
The NCP1599 is a fixed 1 MHz, high-output-current, ...
Description:
The NCP1599 is a fixed 1 MHz, high-output-current, synchronous PWM converter that integrates a low-resistance, high-side P-channel MOSFET and a low-side N-channel MOSFET The NCP1599 utilizes internally compensated current mode control to provide good transient response, ease of implementation, and ...
The NCP451FCT2GEVB evaluation board is designed to quickly ...
Description:
The NCP451FCT2GEVB evaluation board is designed to quickly test the NCP451, a very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy