Seeed Studio 103030009 Relay Shield 3.0 for Arduino/Seeeduino Shield

  • RS Stock No. 174-3234
  • Mfr. Part No. 103030009
  • Manufacturer Seeed Studio
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Seeed Studio Relay Shield 3.0

The Relay Shield provides four high-quality relays that can control high current loads to Arduino / Seeeduino boards. It also provides NO (Normally Open) / NC (Normally Closed) interface. It could be a nice solution for controlling devices that could not be directly controlled by Arduino's Digital I/Os. Standardized shield form factor enables smooth connection with Arduino and compatibles. The shield also has four LED indicators to show the on/off state of each relay.

Features and Benefits:

• Arduino/Seeeduino Shield compatible
• Relay screw terminals
• Working status indicators for each relay
• High quality relays
• Provides NO/NC interfaces

Channel1 Interface

• COM1 - Common pin
• NC1 - Normally Closed. Will be connected with COM1 when RELAY1 pin is set low and disconnected when RELAY1 is high;
• NO1 - Normally Open. Will be connected with COM1 when ŸRELAY 1 pin is set high and disconnected when RELAY1 is low;
• 4 DIGITAL PINS TO CONTROL 4 RELAYS
• RELAY1-RELAY4 pins could be connected directly with Arduino pin number of 7-4, so that four relays could be easily controlled by the Arduino

Technical Details:

• Dimensions: 68.7 x 53.5 x 30.8 mm
• Weight: G.W 77g
• Operating Voltage: 4.75V∼5.25V
• Operating Current: 8∼250 mA
• Switching Voltage: 250VAC/30VDC
• Switching Current: 15A/7A
• Frequency: 1Hz
• Switching Power: 70W
• Relay Life: 100,000 Cycle
• ESD contact discharge: ±4KV
• ESD air discharge: ±8

Specifications
Attribute Value
Kit Classification Relay Shield 3.0
For Use With Arduino/Seeeduino Shield
Kit Name Relay Shield 3.0
Temporarily out of stock - back order for despatch 20/12/2019, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 41.58
(exc. GST)
$ 45.74
(inc. GST)
units
Per unit
1 - 4
$41.58
5 - 9
$40.27
10 - 24
$38.98
25 +
$37.67
Related Products
The STMicroelectronics STEVAL-IFP028V1 is an evaluation board for ...
Description:
The STMicroelectronics STEVAL-IFP028V1 is an evaluation board for the IPS160H single high-side switch. The IPS160H monolithic device drives capacitive, resistive or inductive loads with one side connected to ground. The IPS160H matches safety integrity level (SIL) applications.The STEVAL-IFP028V1 board meets ...
The MIC2128YML Evaluation Board features a constant-frequency, synchronous ...
Description:
The MIC2128YML Evaluation Board features a constant-frequency, synchronous buck controller device with a unique adaptive on-time control architecture. Input voltage range: +7V to +75Vdc (Optimized for +48V)Output voltage: +5Vdc @ 5A (Adjustable down to +0.6V with ±1% accuracy)Switching frequency: 300kHz ...
The X-NUCLEO-PLC01A1 is an input/output expansion board which ...
Description:
The X-NUCLEO-PLC01A1 is an input/output expansion board which provides an STM32 Nucleo MCU board with industrial PLC (Programmable Logic Controller) functionality. • 8 x inputs protected by a CLT01-38SQ7 digital termination array • 8 x outputs driving a VNI8200XP octal ...
The NCP4305FLY40GEVB is designed to test the NCP4305, ...
Description:
The NCP4305FLY40GEVB is designed to test the NCP4305, a synchronous rectification controller that can easily replace a secondary side rectification diode in an SMPS. The evaluation board also has an assembled LLD circuit with components with value close to typical ...