ON Semiconductor NCP380HSNAJAGEVB High-Side Power Distribution Switch Evaluation Board Load Switch for NCP380HSNAJAAT1G

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 70 mΩ (DFN package), P channel MOSFET in a single package. The device limits the output current to a desired level by switching into a regulation current-mode when the output load exceeds the current-limit threshold or a short is present. The current limit threshold is either user adjustable between 100mA and 2.1A via an external resistor or internally fixed. The power switch rise and fall times are controlled to minimize current ringing during switching. An internal reverse-voltage detection comparator disables the power-switch if the output voltage is higher than the input voltage to protect devices on the input side of the switch. The /FLAG logic output asserts low during over current, reverse-voltage or over temperature conditions. The switch is controlled by a logic enable input active high or low.

Specifications
Attribute Value
Power Management Function Load Switch
Kit Classification Evaluation Board
For Use With High-Side Power Distribution Switch
Featured Device NCP380HSNAJAAT1G
Kit Name High-Side Power Distribution Switch Evaluation Board
Discontinued product
Related Products
Automotive Intelligent Power Switch, High-Side Simple high-side MOSFET ...
Description:
Automotive Intelligent Power Switch, High-Side Simple high-side MOSFET switches, but with protection against most destructive influences built-in Automotive qualified to AEC-Q100. Over temperature shutdown Short circuit protection (current limit shutdown)Active clampESD protection Standards AEC-Q100. Simple ...
STMPS21xx, Enhanced Single Channel Power Switches, STMicroelectronics The ...
Description:
STMPS21xx, Enhanced Single Channel Power Switches, STMicroelectronics The STMPS21xx power distribution switches are intended for applications with expected heavy capacitive loads and short circuits 90 mΩ high-side MOSFET switch500 mA continuous current for STMPS2141, STMPS21511000 mA continuous current for ...
PROFET Smart High-Side Power Switch, Single-Channel, Infineon Overload ...
Description:
PROFET Smart High-Side Power Switch, Single-Channel, Infineon Overload protection Current limitation Short-circuit protection Thermal shutdown Overvoltage protection Electrostatic discharge (ESD) protection Overload protection Current limitation Short-circuit protection Thermal shutdown Overvoltage protection ...
Boxed Isolators RS Pro high quality range of ...
Description:
Boxed Isolators RS Pro high quality range of boxed isolator switch disconnectors for use with low voltage switchgear such as power distribution, load isolation and motor start/stop The RS Pro range comes in 3, 4 and 6 pole versions and ...