STMicroelectronics EV-VN7008AJ MOSFET Driver for VN7008AJ

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

EV-VN7008AJ Automotive High-Side Driver Evaluation Board

The EV-VN7008AJ board features the VN7008AJ Smart high-side driver with CurrentSense feedback device designed for Automotive applications. An on-board set of components enables the user to directly connect the load, the power supply and a microcontroller without any additional design effort.

• Operating voltage range: +4 to +28Vdc
• Maximum output current: 96A (limited)
• Very low standby current: 0.5μA
• Drives +12V automotive grounded loads through a 3V/5V CMOS-compatible interface
• Dedicated high precision proportional load current sensing
• OFF-state open-load detection
• Output short to Vcc detection
• Undervoltage shutdown
• Overvoltage clamp
• Load current limitation
• Self-limiting of fast thermal transients
• Configurable latch-off on overtemperature or power limitation with Fault Reset pin
• Loss of ground and loss of Vcc protection
• Reverse battery protection with external components
• Electrostatic discharge protection
• Sockets/Pads for current-sensing resistor
• Output via screw terminal connector
• Dimensions: 25 x 41.5mm

Intelligent Power Switches, STMicroelectronics

Specifications
Attribute Value
Power Management Function MOSFET Driver
Kit Classification Evaluation Board
Featured Device VN7008AJ
On back order for despatch 18/02/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 124.11
(exc. GST)
$ 136.52
(inc. GST)
units
Per unit
1 +
$124.11
Related Products
The HIP2103-4DEMO1Z Demonstration Board, is a general purpose ...
Description:
The HIP2103-4DEMO1Z Demonstration Board, is a general purpose motor drive module with a microprocessor controller on-board It uses a PIC microcontroller to control the HIP2103 and the HIP2104 half bridge drivers with six MOSFETs.The HIP2103-4DEMO2Z Demonstration Board integrates the HIP2103 ...
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and ...
Description:
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and HIP2104DBEVAL1Z evaluation daughter cards constitute an evaluation tool for the HIP2103 and HIP2104 half bridge MOSFET driversThe motherboard platform provides an on-board microcontroller that is used to generate appropriate control inputs to ...
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • ...
The Si875x evaluation boards are ideal for driving ...
Description:
The Si875x evaluation boards are ideal for driving power switches and evaluate the Si8751 and Si752 isolated MOSFET driversIsolation voltage rating up to 2.5 kV RMS, supporting UL1577 and VDE0884 standards. Supports both DC or AC load switching Jumper to ...