RS PRO DFHF Series 6A 250 V ac 400Hz Chassis Mount RFI Filter, with Tab Terminals

  • RS Stock No. 239-854
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FI
Product Details

DFHF Series

Two stage RFI filters which provide very high attenuation in both common and differential mode. Designed specifically for sensitive electronic equipment and applications where interference is frequent and very intensive. A capacitor discharge resistor is included within the design.
Electrical connections by 250 (1/4 in.) size terminals suitable for soldering or push-on receptacles. Refer to Connectors - Terminals section.

Approvals

CSA Certified, VDE, SEMKO, UL recognised.

Approvals

CSA; VDE; SEMKO

Specifications
Attribute Value
Maximum Current Rating 6A
Maximum Voltage Rating 250 V ac
Mounting Type Chassis Mount
Termination Style Tab
Series DFHF
Number of Stages Two Stage
Operating Frequency 400Hz
Length 46mm
Depth 76mm
Capacitance 0.1 x 2 μF, 2200 x 2 pF
Height 28mm
Dimensions 46 x 76 x 28mm
Inductance 0.8 x 2 mH
Leakage Current 0.2 mA
Minimum Operating Temperature -25°C
Maximum Operating Temperature +85°C
Resistance 1MΩ
94 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 84.89
(exc. GST)
$ 93.38
(inc. GST)
units
Per unit
1 - 9
$84.89
10 - 24
$73.41
25 - 49
$60.64
50 - 99
$58.81
100 +
$57.35
Related Products
General purpose two stage RFI filters incorporating an ...
Description:
General purpose two stage RFI filters incorporating an earth line choke These filters are specifically designed to provide high level attenuation to unwanted interference that can occur on all three mains lines. Ideally suited for sensitive electronic equipment that may ...
RF filters which provide high attenuation in both ...
Description:
RF filters which provide high attenuation in both differential and common mode Their extended low frequency performance makes them particularly suitable for industrial frequency converters, motor drives and switch mode power supply applications Constructed using a combination of X2 and ...
Schaffner FN 2090 series 1-phase filters are designed ...
Description:
Schaffner FN 2090 series 1-phase filters are designed for fast and easy chassis mounting Featuring exceptional conductive attenuation, FN 2090 series filters are designed for noisy applications requiring excellent filter performance. Typical applications could be electrical and electronic equipment, consumer ...
From Schaffner the FN 332 single-phase filters provide ...
Description:
From Schaffner the FN 332 single-phase filters provide a good attenuation performance, based on chokes with high saturation resistance and excellent thermal behaviour All FN332 filters are designed for easy and fast chassis mounting. The FN332 series are also available ...