onsemi NCP1618JDR2G, Power Factor Controller, 130 kHz, 35 V 10-Pin, SOIC
- RS Stock No.:
- 261-9535P
- Mfr. Part No.:
- NCP1618JDR2G
- Brand:
- onsemi
Stock check temporarily unavailable - call for stock availability
Added
Price (ex. GST) Each (Supplied on a Reel) Quantities below 150 on continuous strip
$1.762
(exc. GST)
$1.938
(inc. GST)
| Units | Per unit |
| 10 - 95 | $1.762 |
| 100 - 245 | $1.586 |
| 250 - 495 | $1.428 |
| 500 + | $1.286 |
- RS Stock No.:
- 261-9535P
- Mfr. Part No.:
- NCP1618JDR2G
- Brand:
- onsemi
Technical data sheets
Legislation and Compliance
Product Details
The ON Semiconductor power factor correction is an innovative multimode power factor controller with the circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line load range. In very light−load conditions, the circuit can enter the soft skip mode for minimized losses.
Load transient compensation
Switching frequency is lower than 130 kHz
Unity power factor
Switching frequency is lower than 130 kHz
Unity power factor
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
|---|---|
| Maximum Switching Frequency | 130 kHz |
| Start-up Supply Current | 4mA |
| IC Type | Power Factor Controller IC |
| Maximum Source Current | 500mA |
| Maximum Sink Current | 800mA |
| Maximum Supply Current | 4 mA |
| Package Type | SOIC |
| Pin Count | 10 |
| Maximum Operating Supply Voltage | 35 V |