ON Semiconductor NIS5135MN1TXG, Power Factor Controller, -0.6 → 25 V 10-Pin, DFN

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Electronic Fuse, ON Semiconductor

Integrated Power Device
Power Device Thermally Protected
No External Current Shunt Required
9V to 18V Input Range
Internal Charge Pump
A Resistor sets the Current Limit level
A Capacitor programs the Slew Rate of the output at turn on (NIS5132 only)

Voltage & Current Management, ON Semiconductor

Specifications
Attribute Value
Maximum Sink Current -20µA
Maximum Supply Current 3.6 A
Mounting Type Surface Mount
Package Type DFN
Pin Count 10
Dimensions 3 x 3 x 0.95mm
Height 0.95mm
Length 3mm
Maximum Operating Supply Voltage 25 V
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage -0.6 V
Width 3mm
Discontinued product
Related Products
The UPD350 is a highly integrated small form ...
Description:
The UPD350 is a highly integrated small form factor USB Type-C/PD controller compliant with USB Type-C™ specification and USB Power Delivery specification v.3.0. UPD350 provides cable detection and orientation, and implements baseband communication with a partner USB Type-C/PD Device. The ...
Pulse-width modulator (PWM) controllers can support isolated and ...
Description:
Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical ...
The HiperPFS-4 devices incorporate a continuous conduction mode ...
Description:
The HiperPFS-4 devices incorporate a continuous conduction mode (CCM) boost PFC controller, gate driver and 600 V power MOSFET in a single, low-profile (GROUND pin connected) power package. HiperPFS-4 devices eliminate need for external current sense resistors and their associated ...
Pulse-width modulator (PWM) controllers can support isolated and ...
Description:
Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical ...