Raytech M agic-Gel Dielectric, Low Viscosity, Sealing Characteristics, Thermal Conductivity Gel Potting Compound

  • RS Stock No. 703-1231
  • Mfr. Part No. M agic-Gel
  • Manufacturer Raytech
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Raytech Magic Gel

Two component gel with very high dielectric, thermal and sealing characteristics, contained in two bottles.The needed quantity is poured in the small basin in the range of 1:1, then mixed with the supplied mixing spoon and poured in the particular to fill.

Non toxic & safe
Cross links at a low temperature
Low viscosity
Re-enterable after long working periods
No shelf-life
Very high dielectric characteristics
Protection higher than IP68
Installation up to 1kV

Raytech Magic Gel

The Raytech 1000g magic gel is two-component with very high dielectric, thermal and sealing characteristics. The needed quantity is poured in a small basin in the range of 1:1, then mixed with the supplied mixing spoon and poured in the particular to fill.

Features and Benefits

• Non-toxic and safe
• Cross links at a low temperature
• Low viscosity
• Re-enterable after long working periods
• No shelf-life
• Very high dielectric characteristics
• Installation up to 1kV
• Volume resistivity of more than 2.10¹⁵ohm cm
• Dielectric strength of more than 20kV/mm

Certifications

• IP68 rated

Potting Compounds: Raytech

Specifications
Attribute Value
Product Material Gel
Package Type Kit
Package Size 1000 g
Special Properties Dielectric, Low Viscosity, Sealing Characteristics, Thermal Conductivity
Dielectric Strength >20kV/mm
Volume Resistivity > 2 . 10¹⁵Ω cm
160 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 154.64
(exc. GST)
$ 170.10
(inc. GST)
units
Per unit
1 - 5
$154.64
6 - 11
$151.38
12 +
$149.13
Related Products
Q-Sil 553 Silicone Encapsulant Twin Pack Sachet Q-Sil ...
Description:
Q-Sil 553 Silicone Encapsulant Twin Pack Sachet Q-Sil 553 is 2-component, addition-cure, thermally conductive silicone elastomer system It has been specially designed for electronic assembly potting applications. The fully cured elastomer offers good protection against shock, vibration and environmental ...
Thermally Conductive Twin Pack A white, flame retardant, ...
Description:
Thermally Conductive Twin Pack A white, flame retardant, epoxy resin system designed to conduct heat away from 'hot spots' Unlike similar materials this product has relatively low viscosity and gives little risk of abrasion from the fillers. Typical applications include ...
Resin systems are designed to protect and insulate ...
Description:
Resin systems are designed to protect and insulate printed circuit boards (PCBs) and electronic components from the threats of harsh and challenging environments, including, moisture, vibration, thermal or physical shock and general contamination By encapsulating the entire device, resins can ...
Polyurethane Twin Pack A dark grey, two-part, flexible ...
Description:
Polyurethane Twin Pack A dark grey, two-part, flexible encapsulant designed to provide environmental protection whilst not causing component stress by shrinkage during cure,The compound offers a short gel time (75 mins) and no exotherm (heat evolved) problems.In its cured state ...