RS PRO Black Flame Retardant Epoxy Potting Compound

  • RS Stock No. 199-1430
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

General Purpose Twin Pack

A black, flame-retardant, room temperature curing epoxy for potting electrical and electronic components and sub assemblies. The hard, high gloss, jet black finish gives permanent (non repairable) environmental protection. Slight flexibility permits thermal expansion without stress. Low exothermic temperature rise protects components during curing.,Cure time: 6//24 hours @25°C. The compound can be handled after 6 hours but full properties are developed after 24 hours.Cure may be accelerated to 2 hours by baking at 50°C to 100°C. Provides class E insulation. Flammability rating UL94V-0. Compatible with most printed circuit board components and materials including polystyrene capacitors. Non-staining. Choice of pack sizes avoids wastage.

What is Epoxy Resin Potting Compound?

This epoxy resin is a type of electronic potting compound used for encasing or encapsulating PCBs (Printed Circuit Boards) and electronics components. Potting is a process of filling a complete electronic assembly with a solid or gelatinous compound. The potting compound, once applied, cured and hardened encases your electronics in a solid mass providing a barrier which protects and insulates them from harsh environments. These harsh environments include moisture, chemicals, vibration, thermal or physical shock and general contamination. The mechanical protection provided by this epoxy compound enables the components to maintain high performance under extreme conditions.

Features and Benefits

• High hardness material
• Excellent mechanical protection against vibration and physical shock
• Good chemical resistance and water resistance
• Excellent electrical insulation properties
• Adheres to a wide range of substrates
• Flame retardant to UL94 V-0 with 'clean' flame retardant technology
• Hardener free of DDMs or other aromatic amines
• Low shrinkage ratio during curing
• Low coefficient of thermal expansion when subject to temperature changes
• ’Mix in the bag’ twin pack design reduces user contact and mess

What is This Epoxy Resin Potting Compound Used For?

This black epoxy resin is designed to provide protection to electrical components in a general use environment in standard atmospheric conditions. The applications for this cost-effective and versatile compound are diverse and can include PCBs and electronic components in military, industrial, automotive and domestic devices.

Whats in the Pack?

This black epoxy potting compound is supplied in twin pack format. One pack contains the epoxy resin and one contains the hardener both measured to the correct mix ratio. The two compartments are separated by a clip, which, when removed, forms one bag allowing you to mix the contents together. This design prevents air entrapment and allows the epoxy to be applied without any direct user contact avoiding excessive handling and mess. Each twin pack is supplied with full instructions for use. All packs are supplied with a desiccant for storage.

How do you Apply Potting Compound?

Before applying this epoxy potting compound it is important that any residue or contaminants are removed from the electronic components prior to potting. The electronic assembly is placed inside a mould called ’The pot’. This mould is then filled with the mixed potting compound that hardens and permanently protects the assembly. Circuit boards can also be potted and are often called ’potted’ PCBs. These circuit boards have high walled sides forming an enclosure with the mounted electronic components sitting inside. The potting compound is then poured into this enclosure.

Potting Compounds: Twin Packs

Specifications
Attribute Value
Product Material Epoxy
Package Type Pack
Package Size 500 g
Special Properties Flame Retardant
Cure Time 24 h
Hardness 85 Shore D
Thermal Conductivity 0.45W/mK
Colour Black
Maximum Operating Temperature +120°C
Minimum Operating Temperature -40°C
Odour Characteristic
Operating Temperature Range -40 → +120 °C
Chemical Composition Epoxy Resin, Formaldehyde, Neodecanoic Acid Glycidyl Ester, Polymer with 1, 3 Dimethylbenzene
Dielectric Strength 16.6kV/mm
Viscosity Measurement 000 mPa/s at +25°C, 150
Physical Form Viscous Liquid
Temporarily out of stock - back order for despatch 30/09/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 33.08
(exc. GST)
$ 36.39
(inc. GST)
units
Per unit
1 - 4
$33.08
5 - 9
$32.38
10 +
$31.91
Related Products
Low Viscosity Polyurethane A hard and tough black ...
Description:
Low Viscosity Polyurethane A hard and tough black polyurethane potting compound, with excellent adhesion properties to difficult substratesApplications include potting intricate components, radio transmitters, PCBs. Excellent dielectric characteristics Good water and chemical resistance Cure time 24 hours Useable ...
Polyurethane Twin Pack A dark grey, two-part, flexible ...
Description:
Polyurethane Twin Pack A dark grey, two-part, flexible encapsulant designed to provide environmental protection whilst not causing component stress by shrinkage during cure,The compound offers a short gel time (75 mins) and no exotherm (heat evolved) problems.In its cured state ...
The ACC Silicones 1000g silcoset 101 potting compound ...
Description:
The ACC Silicones 1000g silcoset 101 potting compound is a pourable brick-red liquid The addition of Silicone curing agent that cures at room temperature to form a resilient, high-temperature-resistant, silicone rubber. It possesses excellent weathering resistance and is resistant to ...
The Acc silicones AS1701 75ml black silicon adhesive ...
Description:
The Acc silicones AS1701 75ml black silicon adhesive is a non-corrosive, one-part, room-temperature vulcanising silicon rubber, which exhibits excellent primer less adhesive properties with many substrates It cures rapidly in contact with atmospheric moisture to a tough, moderately elastic rubber ...