RS PRO Black Flame Retardant Epoxy Potting Compound

  • RS Stock No. 199-1402
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

General Purpose Twin Pack

A black, flame-retardant, room temperature curing epoxy for potting electrical and electronic components and sub assemblies. The hard, high gloss, jet black finish gives permanent (non repairable) environmental protection. Slight flexibility permits thermal expansion without stress. Low exothermic temperature rise protects components during curing.,Cure time: 6//24 hours @25°C. The compound can be handled after 6 hours but full properties are developed after 24 hours.Cure may be accelerated to 2 hours by baking at 50°C to 100°C. Provides class E insulation. Flammability rating UL94V-0. Compatible with most printed circuit board components and materials including polystyrene capacitors. Non-staining. Choice of pack sizes avoids wastage.

What is Epoxy Resin Potting Compound?

This epoxy resin is a type of electronic potting compound used for encasing or encapsulating PCBs (Printed Circuit Boards) and electronics components. Potting is a process of filling a complete electronic assembly with a solid or gelatinous compound. The potting compound, once applied, cured and hardened encases your electronics in a solid mass providing a barrier which protects and insulates them from harsh environments. These harsh environments include moisture, chemicals, vibration, thermal or physical shock and general contamination. The mechanical protection provided by this epoxy compound enables the components to maintain high performance under extreme conditions.

Features and Benefits

• High hardness material
• Excellent mechanical protection against vibration and physical shock
• Good chemical resistance and water resistance
• Excellent electrical insulation properties
• Adheres to a wide range of substrates
• Flame retardant to UL94 V-0 with 'clean' flame retardant technology
• Hardener free of DDMs or other aromatic amines
• Low shrinkage ratio during curing
• Low coefficient of thermal expansion when subject to temperature changes
• ’Mix in the bag’ twin pack design reduces user contact and mess

What is This Epoxy Resin Potting Compound Used For?

This black epoxy resin is designed to provide protection to electrical components in a general use environment in standard atmospheric conditions. The applications for this cost-effective and versatile compound are diverse and can include PCBs and electronic components in military, industrial, automotive and domestic devices.

Whats in the Pack?

This black epoxy potting compound is supplied in twin pack format. One pack contains the epoxy resin and one contains the hardener both measured to the correct mix ratio. The two compartments are separated by a clip, which, when removed, forms one bag allowing you to mix the contents together. This design prevents air entrapment and allows the epoxy to be applied without any direct user contact avoiding excessive handling and mess. Each twin pack is supplied with full instructions for use. All packs are supplied with a desiccant for storage.

How do you Apply Potting Compound?

Before applying this epoxy potting compound it is important that any residue or contaminants are removed from the electronic components prior to potting. The electronic assembly is placed inside a mould called ’The pot’. This mould is then filled with the mixed potting compound that hardens and permanently protects the assembly. Circuit boards can also be potted and are often called ’potted’ PCBs. These circuit boards have high walled sides forming an enclosure with the mounted electronic components sitting inside. The potting compound is then poured into this enclosure.

Potting Compounds: Twin Packs

Specifications
Attribute Value
Product Material Epoxy
Package Type Pack
Package Size 50 g
Special Properties Flame Retardant
Cure Time 24 h
Hardness 85 Shore D
Thermal Conductivity 0.45W/mK
Colour Black
Maximum Operating Temperature +120°C
Minimum Operating Temperature -40°C
Physical Form Viscous Liquid
Operating Temperature Range -40 → +120 °C
Odour Characteristic
Dielectric Strength 16.6kV/mm
Chemical Composition Epoxy Resin, Formaldehyde, Neodecanoic Acid Glycidyl Ester, Polymer with 1, 3 Dimethylbenzene
Viscosity Measurement 000 mPa/s at +25°C, 150
3 In stock for delivery within 1 working day(s)
Price (ex. GST) Each
$ 18.52
(exc. GST)
$ 20.37
(inc. GST)
units
Per unit
1 - 9
$18.52
10 - 19
$18.13
20 +
$17.85
Related Products
Floor Patch® Multi-purpose concrete patching compound Chemically resistant ...
Description:
Floor Patch® Multi-purpose concrete patching compound Chemically resistant concrete grey repair mortar Bonds to new and old concrete For internal & external use Pot life 45mins Shore hardness 85Resistance to water, oils, petrol, alkalis and most chemicals Ready to walk ...
Q-Sil 553 Silicone Encapsulant Twin Pack Sachet Q-Sil ...
Description:
Q-Sil 553 Silicone Encapsulant Twin Pack Sachet Q-Sil 553 is 2-component, addition-cure, thermally conductive silicone elastomer system It has been specially designed for electronic assembly potting applications. The fully cured elastomer offers good protection against shock, vibration and environmental ...
Raytech ISAAC 4 Gel Box Line The Raytech ...
Description:
Raytech ISAAC 4 Gel Box Line The Raytech Isaac 4 and Isaac 4MP are pre-filled junction box for sealing and protecting your electrical connections The gel box line has been designed to bring the inside connectors outdoors by having dimensions ...
Raytech PASCAL 6 Gel Box Line The Raytech ...
Description:
Raytech PASCAL 6 Gel Box Line The Raytech Pascal 6 and Pascal 6mp gel box lines are pre-filled junction box for sealing and protecting your electrical connections The gel box line has been designed to bring the inside connectors outdoors ...