RS PRO Grey Flame Retardant PUR Potting Compound

  • RS Stock No. 199-1395
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Polyurethane Twin Pack

A dark grey, two-part, flexible encapsulant designed to provide environmental protection whilst not causing component stress by shrinkage during cure.,The compound offers a short gel time (75 mins) and no exotherm (heat evolved) problems.In its cured state it is flame retardant and demonstrates good adhesion to a wide range of materials.Ideal for flexible joints.,Cure time: 16 hours @ 25°C

What is Polyurethane Potting Compound?

Polyurethane potting compound is a type of semi-rigid electronic potting compound used for potting PCBs (Printed Circuit Boards), electronics components and cable joints. Potting is a process of filling a complete electronic assembly with a solid or gelatinous compound. The potting compound, once applied, cured and hardened encases your electronics in a solid mass. This semi-rigid mass acts as a barrier which provides your components with electrical insulation and protection from water. The protection offered by this potting compound will enhance your products performance and will continue to do so even through extensive thermal cycling (the alternate heating and cooling of a material)

Features and Benefits

• Semi-rigid system
• Excellent water resistance
• Excellent electrical insulation properties
• Flame retardant to UL94 V-2
• Wide operating temperature range of -40 to +110°C
• Good thermal cycling protection
• ’Mix in the bag’ twin pack design reduces user contact and mess

What is This Polyurethane Resin Potting Compound Used For?

This flexible potting compound is designed for potting circuits that contain delicate electrical components such as ferrites or glass reed switches. This potting compound is also used for encapsulation in cable jointing applications.

What's in the Pack?

This potting compound is supplied in a two-part, twin pack format. One pack contains the polyurethane resin and the other contains the hardener both measured to the correct mix ratio. The two compartments are separated by a clip, which, when removed, forms one bag allowing you to mix the contents together. This design prevents air entrapment and allows the resin to be applied without any direct user contact avoiding excessive handling and mess. Each twin pack is supplied with full instructions for use. All packs are supplied with a desiccant for storage.

How do you Apply Potting Compound?

Before applying this potting compound it is important that any residue or contaminants are removed from the electronic components prior to potting. The electronic assembly is placed inside a mould called ’The pot’. This mould is then filled with the mixed potting compound that hardens and permanently protects the assembly. Circuit boards can also be potted and are often called ’potted’ PCBs. These circuit boards have high walled sides forming an enclosure with the mounted electronic components sitting inside. The potting compound is then poured into this enclosure.

Potting Compounds: Twin Packs

Specifications
Attribute Value
Product Material PUR
Package Type Pack
Package Size 500 g
Special Properties Flame Retardant
Cure Time 24 h
Hardness 75 Shore A
Colour Grey
Maximum Operating Temperature +110°C
Minimum Operating Temperature -40°C
Viscosity Measurement 4000 mPa/s at +20°C
Dielectric Strength 12kV/mm
Chemical Composition Calcium Carbonate
Physical Form Viscous Liquid
Viscosity Description Low Viscosity
Volume Resistivity 1012Ω cm
Operating Temperature Range -40 → +110 °C
Temporarily out of stock - back order for despatch 30/09/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 35.28
(exc. GST)
$ 38.81
(inc. GST)
units
Per unit
1 - 4
$35.28
5 - 9
$34.54
10 +
$34.04
Related Products
The Electrolube 250g black polyurethane resin potting compound ...
Description:
The Electrolube 250g black polyurethane resin potting compound has high toughness and tears resistance It is ideally suited for marine and harsh environment situations. Excellent oxidation resistance Low moisture sensitivity during cure Low water absorption and high resistance to sea ...
Resin systems are designed to protect and insulate ...
Description:
Resin systems are designed to protect and insulate printed circuit boards (PCBs) and electronic components from the threats of harsh and challenging environments, including, moisture, vibration, thermal or physical shock and general contamination By encapsulating the entire device, resins can ...
SE2005 Silicone Encapsulant SE2005 is a readily pourable, ...
Description:
SE2005 Silicone Encapsulant SE2005 is a readily pourable, white, two component silicone elastomer which cures on addition of the catalyst to a resilient rubber The hardness of the cured material is 40-45° IRHD. It is used to provide protection from ...
The ACC Silicones 1000g silcoset 101 potting compound ...
Description:
The ACC Silicones 1000g silcoset 101 potting compound is a pourable brick-red liquid The addition of Silicone curing agent that cures at room temperature to form a resilient, high-temperature-resistant, silicone rubber. It possesses excellent weathering resistance and is resistant to ...