ProMinent Diaphragm Electric Operated Positive Displacement Pump, 49L/h, 4 bar, 100 → 240 V

Solenoid diaphragm metering pump with optoDrive® drive technology. Complete control of the suction and pressure stroke for optimal adaptation to the metering task and monitoring of the peripheral hydraulic instruments via optoGuard®. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options and connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and can be used as a control centre where programmable logic controllers would normally be required.

PVDF liquid end with PTFE seals, resistant to most chemicals
Programmable suction and delivery stroke duration
Continuous or pulsation dosing
Integrated injection control optoGaurd detects blocked dosing points, broken dosing lines and air or gas bubbles
Pump can be adapted to the dosed media
Foot valve and injection valve
Two-stage, float-type level switch input
Fault indicating relay
External control via 0/4-20 mA and volt free contact
Universal control cable 5m
Suction lift: 3mWG
2m suction tube, 5m discharge tube
Integral bleed function
IP65 housing
Supply voltage 100 - 230 V ±10 %, 50 / 60 Hz

The Delta arange of dosing pumps are suitable for use in a broad range of aplications including,
Laboratory chemical monitoring
Cooling water circuits
Metering disinfectants
Paper industry de-foamers
General water treatments
Metering for PH correction dosing
Metering of chemicals and disinfectants

The ProMinent DLTA0450 series solenoid-driven diaphragm metering pump with optoDrive technology has a flow rate of 4Ll/hour and 4bar working pressure. This product facilitates complete control of the suction and pressure stroke for optimal adaptation to the metering task and monitoring of the peripheral hydraulic instruments via optoGuard. The suction and pressure strokes can be adapted to the individual application. The delta pump is equipped for almost any application due to numerous drive options and connection via Profibus or can bus to the central control station. The pump is fitted with the option “process timer" and can be used as a control centre where the programmable logic controllers would usually be required.

•
The supply voltage is between 100V to 230V
• Maximum fluid temperature is 200C
• Input power is 9.6W
• PVDF liquid end with PTFE seals, resistant to most chemicals
• Continuous or pulsation dosing
• Pump can be adapted to the dosed media
• Foot valve and injection valve
• Two-stage, float-type level switch input
• Fault indicating relay
• Integral bleed function
• Universal control cable 5m
• Suction lift: 3mWG
• 2m suction tube and 5m discharge tube

•
The Delta range of dosing pumps are suitable for use in a broad range of applications
• Laboratory chemical monitoring
• Cooling water circuits
• Metering disinfectants
• Paper industry defoamer
• General water treatments
• Metering for PH correction dosing
• Metering of chemicals and disinfectants

•
IP65 rated

Metering/Dosing Pumps

For use in the chemical, pharmaceutical and food/drinks industries. All have IP65 glass fibre reinforced housings, solenoid drive mechanisms and LCD displays. A comprehensive user manual is supplied with each model.