Hi-Force Single, Portable Low Height Hydraulic Cylinder, HLS502, 50T, 60mm stroke

  • RS Stock No. 808-040
  • Mfr. Part No. HLS502
  • Manufacturer Hi-Force
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Low Height Cylinders

Use where collapsed height is a premier requirement in a lifting, levelling or pushing application
Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity

//media.rs-online.com/t_line/L808012-01.gif

Low Height Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately

Warning

  • Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specifications
Attribute Value
Manufacturer Series HLS
Single/Double Acting Single
Capacity 50t
Stroke 60mm
Closed Height 126mm
Extended Height 186mm
Cylinder Effective Area 71.3cm²
Oil Capacity 428cm³
Outside Diameter 5in
Maximum Operating Pressure 10000 psi
Weight 10.4kg
5 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 824.94
(exc. GST)
$ 907.43
(inc. GST)
units
Per unit
1 +
$824.94
Related Products
Combine minimum collapsed height with optimum stroke They ...
Description:
Combine minimum collapsed height with optimum stroke They provide a short adjusting and lifting force in confined work areas Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension
Enerpac RS-Series Hydraulic Cylinders are fitted with the ...
Description:
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation
Very low height cylinders combine minimum closed height ...
Description:
Very low height cylinders combine minimum closed height with maximum stroke to provide a short adjusting and lifting force in very confined work areas All cylinders have a 6mm stroke and are manufactured to the same high standards as our ...
Enerpac RS-Series Hydraulic Cylinders are fitted with the ...
Description:
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation