Festo Soft Start Valve Pilot/Spring G 1/2 MS6 Series

  • RS Stock No. 122-8226
  • Mfr. Part No. MS6-DL-1/2
  • Manufacturer Festo
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): HU
Product Details

MS-DL Series Soft Start Valves

The Festo MS-DL series of pneumatically actuated soft start valves allow pressure to be gradually built up when turned on, preventing sudden and erratic movements at the actuator. The valve uses a direct external pilot for switching and switching can be adjusted for the required time delay.

Features and Benefits

  • A pressure gauge or sensor can be installed for system monitoring

  • Module connector for connection to MS4 or MS6 combination air preparation units is available

  • The switching pressure for this series is approximately 50% of set pressure

What is a soft start valve?

Soft start valves throttle gas flow to prevent turbulence in machine cylinders, to avoid damage to pneumatic engines.

Soft-start Valve MS6-DL-1/2

  • Piston poppet valve design

  • Non-reversible flow direction

  • Assembly possible in any position

  • Throttable exhaust air function

  • Mechanical spring reset

  • Operating pressures of up to 18 bar

  • The valve has a standard nominal flow rate 6,450 I/min

  • G1/2 pneumatic connection

  • The materials used are free of copper and PTFE, also conforming to RoHS

Soft Start and Quick Exhaust Valves

Specifications
Attribute Value
Manufacturer Series MS6
Connection Port Thread G 1/2
Actuation Type Pilot/Spring
Body Material Aluminium
Maximum Flow Rate 6400 (Relief Direction) L/min, 6450 (Main Flow Direction) L/min
Minimum Operating Pressure 4bar
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Thread Size 1/2in
Maximum Operating Pressure 18 bar
Number of Positions 2
Number of Ports 2
Hazardous Area Certification ATEX
Thread Standard BSPP
6 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 168.88
(exc. GST)
$ 185.77
(inc. GST)
units
Per unit
1 +
$168.88
Related Products
Super X Valves Modular with orientable solenoid coils ...
Description:
Super X Valves Modular with orientable solenoid coils and plugs for easy installation Features and Benefits Choice of solenoid coils, ordered separately Captive ’O’ ring soft seal, spool valve design Electrical connection 22mm ind std Protection rating IP65Zinc die cast ...
Start-up valve for low speed air supply to ...
Description:
Start-up valve for low speed air supply to gradually raise Initial pressure in an air system and for quick exhaust by cutting off air supply Power consumption: 035 WImproved flow rate characteristics: Up to 2.3 times C[dm3/(s·bar)]: 9.2Energy saving: No ...
Fluid: air Operating pressure range: 015 - 0.7MPa ...
Description:
Fluid: air Operating pressure range: 015 - 0.7MPa Effective area mm 2 (Cv): 5 port body ported 0.9 (0.05)5 port base mounted w/sub-plate 1.8 (0.1)Coil rated voltage: 3, 5, 6, 12, 24VDC,100, 110, 200, 220VACAmbient & fluid temp: max. 50°C. ...
Soft Start/Dump Valve Use recommended to aid compliance ...
Description:
Soft Start/Dump Valve Use recommended to aid compliance with the European Machinery Directive Controlled increase of downstream pressure on start up High forward flow capacity (typically 21dm3/s or 57 dm3/s)High flow dump facility for fast system shutdown24Vdc solenoid pilot operation, ...