IMI Norgren T40 Bronze 10bar Pneumatic Silencer, Threaded, R 1/2 Male

Sintered pneumatic silencers from Norgren are compact by design and reduce the noise levels of exhausted air from pneumatic equipment such as pneumatic valves. Norgren's sintered mufflers also help prevent dirt entering unprotected ports and causing damage wear.
Available flow factors from 0.54 to 5.1 dependant upon size.

Maximum Working Pressure 10bar
Maximum temperature 80°C
Cleanable 40 micron diffusion element
Sintered bronze element
Brass base

Need your compressed air equipment to pipe down? Try this pneumatic silencer from IMI Norgren. Its sintered muffler subdues exhaust ports, so helps to stop noise fatigue from wearing you out. The unit also conveniently acts as a filter by stopping dirt and metal chips from entering inlets. This reduces the chance of damage or excessive wear, so increases the service life of your pneumatic equipment. Installation is a cinch, as the device screws directly onto an exhaust port. The silencer holds up well in moist environments, thanks to its corrosion-resistant brass body.

• Cleanable diffuser element, so there's no need to discard it after a single use
• Compact length of 60mm needs minimal mounting space
• Maximum operating pressure of 10 bar, so suitable to use in demanding circuits
• Compatible with compressed air and inert gases to best suit your network's needs

• Food and beverage industries
• Dentistry tools
• Automated production lines
• Lifts and hoisting equipment

You can use this silencer with media ranging in temperature between -20°C and +80°C. For temperatures below +2°C, you should ensure your compressed air is dry enough to prevent ice formation.