Festo Pneumatic Cylinder 20mm Bore, 20mm Stroke, ADN Series, Double Acting

  • RS Stock No. 136-6773
  • Mfr. Part No. ADN-20-20-A-P-A
  • Manufacturer Festo
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

ADN ISO 21287 Pneumatic Cylinders- Flexible Cushioning

FESTO ADN series of compact pneumatic cylinder are up to 50% smaller than standard pneumatic cylinders for maximum productivity in confined spaces. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod. The extensive range of stroke length and bore size variants in the ADN series can be configured to suit a broad range of applications.

Pneumatic Cylinder Operation
The ADN series is a double acting actuator with air applied to extend and to retract the piston in a linear motion to the desired stroke length. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Cylinders are fitted with flexible polymer end cushioning helping to reduce noise and vibration, prolong service life and increase production and productivity.

Features and Benefits

Complies with ISO 21287 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Cushioning requires no adjustment saving maintenance time and cost

How do I mount the pneumatic cylinder?

The ADN series pneumatic actuators can be mount horizontally or vertically to suit the required application. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

FESTO ADN Series

Specifications
Attribute Value
Stroke 20mm
Bore 20mm
Action Double
Manufacturer Series ADN
Pneumatic Connection M5
Piston Rod Thread Gender Male
Dimensions 35.5 x 35.5 x 62.5mm
Length 62.5mm
Width 35.5mm
Maximum Operating Pressure 10 bar
Height 35.5mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
On back order for despatch 27/09/2019, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 122.96
(exc. GST)
$ 135.26
(inc. GST)
units
Per unit
1 +
$122.96
Related Products
The RSQ series is a fixed-height stopper cylinder ...
Description:
The RSQ series is a fixed-height stopper cylinder with high endurance and low breakaway characteristics. Large rod and cylinder bearings give very high side impact resistanceMagnetic pistonRubber sealsProof pressure 15 barMaximum operating pressure 9.9 barTemperature range -10°C to +60°CLubrication not ...
Single and double-acting compact short-stroke cylinders, operating with ...
Description:
Single and double-acting compact short-stroke cylinders, operating with lubricated or non-lubricated filtered compressed air. CO5 series cylinders are easy to install in confined spaces, easy to clean, and offer good corrosion resistance. The cylinders are supplied pre-lubricated (for applications where ...
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
The CQS Series of Compact Cylinders is available ...
Description:
The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same. Space and weight savingMagnetic or non-magnetic pistons availableProof pressure 15 barInternal thread rod ends Nitrile ...